| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seater sofa overall dimensions | 2380 x 880 x 900 mm | |
|---|---|---|
| Single-seat armchair overall dimensions | 1120 x 880 x 900 mm | |
| Seat height from floor | 450 mm | |
| Seat depth | 650 mm | |
| Armrest height from floor | 620 mm | |
| Backrest total height | 500 mm | |
| Tea table overall dimensions | 1600 x 900 x 520 mm | |
| Tea table under-table knee clearance | 420 mm | |
| Matching storage stool dimensions | 400 x 400 x 400 mm | |
| Armrest wood top width | 180 mm | |
| Seat cushion thickness | 120 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Set total net weight | 280 kg | |
|---|---|---|
| Per-seat static load capacity | 200 kg | |
| Seat cushion foam density | 45 kg/m³ | |
| Seat cushion foam rebound rate | 45% | |
| Sofa set total seating capacity | 5 persons | |
| Backrest tilt angle | 105 degrees | |
| Total sofa set seating capacity | 5 persons | |
| Fixed backrest tilt angle | 105 degrees | |
| Upholstery seam stitch pitch | 8 stitches per 30mm | |
| Frame internal moisture content | 12% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | Dark brown 1.0mm thick PU faux leather, abrasion resistance 50000 cycles | |
|---|---|---|
| Frame and solid wood components | Kiln dried solid hardwood with red mahogany stain finish, frame timber thickness 40mm | |
| Seat cushion core | High density polyurethane foam, 120mm thickness, wrapped with 20mm soft foam top layer | |
| Backrest core | High density polyurethane foam, 80mm thickness, segmented padded design | |
| Tea table top inlay | Black matte stone/leather look wear-resistant inlay panels set into wood frame | |
| Tea table side panels | Carved solid wood decorative side panels with recessed line details | |
| Sofa base trim | Matte black upholstered lower base panels accented with solid wood edge molding | |
| Foot pads | Hardwood integrated block feet with scratch-resistant floor protection pads | |
| Stool cushion top | Dark brown PU upholstered padded top matching sofa upholstery | |
| Internal support frame | 30mm x 50mm solid wood joist system under seat cushions, no sag design | |
| Structural frame components | Kiln-dried solid hardwood with red mahogany stain finish, frame timber section thickness 40mm | |
| Backrest cushion core | High density polyurethane foam, 80mm thickness, segmented padded panel design |
Adjustment / rotation / tilt / mobility / storage features
| Fixed position seating | Non-reclining, non-rotating fixed frame construction designed for formal executive reception spaces | |
|---|---|---|
| Integrated wide wood armrests | Wide polished wood arm surfaces support arm placement and can hold small items such as cups and mobile devices | |
| Tea table multi-use surface | Large divided table top provides dedicated space for integrated tea set, documents and decorative display items | |
| Hidden stool storage | Two cube stools tuck partially under the tea table overhang when not in use to save floor space | |
| Stool hidden storage | Cube stools include lift-up upholstered lids providing internal enclosed storage for tea accessories | |
| Stain-resistant upholstery | Smooth non-porous PU upholstery allows wipe cleaning of liquid spills with a damp cloth, 30-second stain removal for common office beverages | |
| Segmented back support | Three-section padded back design on 3-seater sofa provides separated back support for each seated user | |
| Floor protection design | Integrated wood feet elevate the sofa base 50mm off the floor, preventing scuff damage to polished tile or wood office flooring | |
| Fixed frame construction | Non-reclining, non-rotating fixed joinery frame with no user adjustment mechanisms, designed for formal executive reception spaces | |
| Wide solid wood armrests | 180mm wide polished wood arm surfaces support stable arm placement and can hold 5kg load items such as teacups and mobile devices | |
| Divided tea table surface | 1600mm long table top with 4 divided surface sections providing dedicated space for integrated tea sets, documents and decorative display items | |
| Concealed stool storage | Two cube stools tuck fully under the tea table overhang when not in use, reducing occupied floor space by 0.32sqm |
Verified carton / gross weight / assembly / loading data
| Total number of shipping cartons | 7 cartons | |
|---|---|---|
| Largest carton dimensions (3-seater sofa) | 2450 x 930 x 680 mm | |
| Single-seat chair carton dimensions | 1180 x 930 x 680 mm | |
| Tea table carton dimensions | 1680 x 980 x 580 mm | |
| Total shipment gross weight | 330 kg | |
| Total shipment CBM | 3.8 m³ | |
| On-site assembly time | 90 minutes | |
| 40HQ container load quantity | 26 sets | |
| Total shipment volume | 3.8 m³ | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Executive office reception area | Sized to fit 30sqm dedicated reception zones in chairman or general manager offices, supporting formal guest reception | |
|---|---|---|
| Corporate VIP meeting lounge | Appropriate for corporate visitor reception rooms providing comfortable formal seating for senior client meetings | |
| Tea room and hospitality space | Included large tea table provides dedicated surface for traditional Chinese tea service during guest visits | |
| Government and institution reception spaces | Conservative dark brown and wood finish design is appropriate for formal institutional office environments | |
| Recommended matching configuration | Pair with matching traditional red wood executive desks and bookcases to create a unified cohesive office aesthetic | |
| Executive private office reception zone | Sized to fit 30sqm dedicated reception areas in chairman or general manager offices, supporting formal guest reception for up to 5 visitors | |
| Office hospitality tea room | Included large divided tea table provides dedicated stable surface for traditional Chinese tea service during guest visits | |
| Government and public institution reception spaces | Conservative dark brown and red wood finish design is appropriate for formal institutional office environments |
EU Market Access Requirements* EN Standards
| EN 1022:2005 | Applicable standard for domestic furniture seating, specifies stability test methods for upright seating furniture | |
|---|---|---|
| EN 12520:2015 | Applicable standard for furniture strength, durability and safety requirements for non-domestic seating used in office environments | |
| EN 13722:2004 | Applicable standard for furniture tables, strength and durability test methods for reception and coffee tables |
Standards applicable to China-market projects
| GB 18584-2001 | Applicable standard for limit of harmful substances in wood furniture, formaldehyde emission from wood components ≤1.5mg/L | |
|---|---|---|
| GB/T 16799-2008 | Applicable standard for polyurethane synthetic leather used for upholstery, specifies abrasion, peel strength and color fastness requirements | |
| GB/T 3324-2017 | Applicable standard for general technical requirements for wooden furniture, specifies dimensional tolerance, finish adhesion and structural strength requirements |
This product must meet the following technical requirements: 1. GB 18584-2001: Applicable standard for limit of harmful substances in wood furniture, formaldehyde emission from wood components ≤1.5mg/L; 2. GB/T 16799-2008: Applicable standard for polyurethane synthetic leather used for upholstery, specifies abrasion, peel strength and color fastness requirements; 3. GB/T 3324-2017: Applicable standard for general technical requirements for wooden furniture, specifies dimensional tolerance, finish adhesion and structural strength requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
