| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Three-seater sofa overall dimensions | 2180 x 900 x 890 mm | |
|---|---|---|
| Single armchair overall dimensions | 980 x 900 x 890 mm | |
| Matching coffee table overall dimensions | 1300 x 600 x 550 mm | |
| Seat height from floor | 450 mm | |
| Seat depth (usable) | 640 mm | |
| Armrest height from seat | 180 mm | |
| Backrest total height from seat | 440 mm | |
| Coffee table leg height | 120 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest cushion thickness | 100 mm | |
| Metal sled leg foot spread width | 680 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Complete set total gross weight | 180 kg | |
|---|---|---|
| Per-seat static load capacity | 300 kg | |
| Seat foam density | 40 kg/m³ | |
| Foam rebound rate | 60% | |
| Upholstery abrasion resistance | 50000 cycles | |
| Frame joint static load durability | 100000 cycles | |
| Recommended maximum user weight per seat | 150 kg | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seating upholstery | 1.4mm thick taupe top-grain leather match | |
|---|---|---|
| Inner load-bearing frame | Kiln-dried solid hardwood frame, 25mm section thickness | |
| Seat support system | 3.8mm diameter sinuous S-shaped springs spaced 100mm apart | |
| Cushion fill | High-density high-resilience polyurethane foam with 20mm down wrap | |
| Seating support legs | 1.5mm thick matte black powder-coated curved steel sled base | |
| Coffee table top | 20mm thick sintered stone with matte grey stone texture | |
| Coffee table legs | 1.2mm thick matte black powder-coated square steel tube legs | |
| Upholstery stitching | Bonded nylon thread with 30mm seam pitch for high-wear seams | |
| Internal padding wrap | 25g/m² non-woven fabric lining under upholstery | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed 3-seater sofa plus two symmetric single armchairs | |
|---|---|---|
| Recline adjustment | Fixed upright backrest angle at 105 degrees with no tilt mechanism | |
| Mobility feature | Non-marking floor glides fitted to all sled leg feet | |
| Cleaning feature | Stain-resistant water-repellent upholstery finish for commercial high-traffic use | |
| Coffee table function | Low-profile flat top for placing refreshments, documents and decor | |
| Structural stability | Dual-point floor contact per sled leg to eliminate wobble on hard floors | |
| Assembly requirement | Minimal assembly required, attaching legs to pre-built upholstered bodies | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Executive office reception zones | Fits formal visitor waiting areas outside private executive suites | |
|---|---|---|
| Corporate meeting lounge spaces | Supports 5-person formal conversation and short meeting use | |
| Co-working common areas | Suitable for high-traffic shared waiting and casual collaboration zones | |
| High-end lobby waiting areas | Coordinates with modern minimalist commercial interior design schemes | |
| Corporate boardroom breakout spaces | Provides relaxed secondary seating adjacent to formal conference tables | |
| Recommended matching | Pair with set included coffee table and complementary executive office desks and task chairs |
EU Market Access Requirements* EN Standards
| Seating stability and strength | EN 12520:2015 | |
|---|---|---|
| Upholstered furniture flammability | EN 1021:2014 | |
| Furniture surface durability | EN 14465:2008 |
US and Canada office-furniture standards
| Lounge seating performance | ANSI/BIFMA X2020 |
|---|
Standards applicable to China-market projects
| Upholstered furniture general safety | GB 28007 | |
|---|---|---|
| Furniture harmful substance limit | GB 18584 | |
| Furniture mechanical performance test | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Upholstered furniture general safety: GB 28007; 2. Furniture harmful substance limit: GB 18584; 3. Furniture mechanical performance test: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
