| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall outer dimensions | 2800 x 980 x 720 mm | |
|---|---|---|
| Seat height from floor | 420 mm | |
| Seat depth (usable seating surface) | 650 mm | |
| Seat width (usable seating surface) | 2400 mm | |
| Backrest height from seat surface | 300 mm | |
| Curved arm outer diameter (rounded end) | 380 mm | |
| Channel tuft row spacing (seat surface) | 120 mm | |
| Accent pillow dimensions (mustard matching) | 550 x 550 mm | |
| Accent pillow dimensions (white contrast) | 500 x 500 mm | |
| Gold base trim height | 30 mm | |
| Backrest channel segment width | 600 mm | |
| Seat front edge thickness | 200 mm | |
| Backrest channel segment height | 90 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Sofa net weight (unpackaged) | 110 kg | |
|---|---|---|
| Total static load capacity (distributed) | 450 kg | |
| Seat foam density | 40 kg/m³ | |
| Backrest foam density | 28 kg/m³ | |
| Fabric abrasion resistance (Martindale) | 30000 cycles | |
| Seat cushion compression resilience | 60% | |
| Recommended maximum occupancy | 3 adults | |
| Structural frame static load test rating | 1500 N per seat position | |
| Seam stitch strength | 120 N | |
| Structural frame service life | 5 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Primary upholstery fabric | Mustard yellow polyester velvet, 320gsm weight, channel tufted stitching | |
|---|---|---|
| Internal support frame | Kiln-dried solid hardwood + 12mm thick plywood panel reinforcement, glued and screwed joints | |
| Seat padding structure | Multi-layer high-density polyurethane foam wrapped in 20mm thick down-feather blended top layer | |
| Backrest padding structure | Single-layer medium-density polyurethane foam wrapped in 10mm thick soft polyester fiber wadding | |
| Rounded arm padding | High-density polyurethane foam fully wrapped around curved wood frame, continuous upholstery cover | |
| Bottom base trim | Brushed gold-toned stainless steel, 1.2mm thickness, polished protective lacquer coating | |
| Contrast accent pillow (white) | Matte off-white linen-blend woven fabric, filled with 3D hollow polyester fiber | |
| Matching accent pillow (mustard) | Identical mustard yellow velvet upholstery as main frame, filled with 3D hollow polyester fiber | |
| Hidden support feet | Black PP plastic glide feet under metal trim, 5mm height, floor-protecting felt pad | |
| Seat support system | 80mm wide elastic webbing spaced 80mm apart across the seat frame, no coil spring construction | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Seating structure | Fixed integrated seat and back cushions, no removable cushion design for a smooth continuous channel tufted surface | |
|---|---|---|
| Curved profile configuration | Gentle banana-shaped curved frame with rounded padded arms at both ends, creating an enveloping conversational seating layout | |
| Channel tufting design | Vertical stitching on seat surface and horizontal stitching on backrest forming uniform padded segments, preventing foam shifting with long-term use | |
| Elevated base design | Narrow gold metal trim at the bottom creates a subtle floating visual effect, with 5mm clearance under the frame for floor cleaning access | |
| Pillow configuration | Two pre-configured throw pillows (one matching mustard velvet, one contrasting white linen) positioned on the seat for decorative and lumbar support use | |
| Floor protection function | Felt-padded glide feet under the base, preventing scratches on hard flooring surfaces and reducing movement noise | |
| Upholstery maintenance | Stain-resistant velvet fabric with short pile, suitable for regular vacuuming and spot cleaning with mild fabric detergent | |
| Load distribution | Continuous curved frame distributes occupant weight evenly across the full base length, no concentrated load points at frame joints under 3 adult occupancy | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room application | Suitable for modern, contemporary or glam style home living rooms, positioned as primary seating paired with low-profile round coffee tables | |
|---|---|---|
| Luxury apartment lounge application | Ideal for high-end apartment open-plan lounge areas, providing statement seating for guest reception and daily family use | |
| Boutique commercial waiting area application | Suitable for high-end boutique hotel lobbies, designer studio reception areas or upscale beauty salon waiting zones, creating a comfortable stylish seating zone | |
| Recommended matching furniture | Pair with low-profile round nesting coffee tables, boucle upholstered accent chairs and soft textured area rugs to complete a cohesive contemporary seating group | |
| Space size requirement | Recommended for rooms with minimum 3500mm available wall length, allowing 350mm clearance on both ends of the sofa for circulation | |
| User suitability | Designed for adult users in domestic or light commercial environments, not suitable for high-traffic public spaces such as airport waiting halls or fast food restaurants | |
| Positioning guidance | Recommended to float 300mm away from walls rather than push flush against wall surfaces, to highlight the curved profile and enable cleaning access around the full sofa perimeter |
EU Market Access Requirements* EN Standards
| EN 1725 | 1998 Domestic furniture - Seating - Safety requirements | |
|---|---|---|
| EN 1021-1 | 2014 Upholstered furniture - Assessment of ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette |
Standards applicable to China-market projects
| GB/T 1952.1-2012 Upholstered furniture | Sofa | |
|---|---|---|
| GB/T 27717-2011 Furniture hardware | Furniture feet |
This product must meet the following technical requirements: 1. GB/T 1952.1-2012 Upholstered furniture: Sofa; 2. GB/T 27717-2011 Furniture hardware: Furniture feet; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
