| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Set overall layout dimensions | 2400 x 1200 x 800 mm | |
|---|---|---|
| Single lounge chair overall dimensions | 860 x 1020 x 800 mm | |
| Lounge chair seat width | 570 mm | |
| Lounge chair seat depth | 570 mm | |
| Lounge chair seat height from floor | 470 mm | |
| Lounge chair backrest height from seat | 330 mm | |
| Side table overall dimensions | 380 x 380 x 530 mm | |
| Side table top diameter | 380 mm | |
| Side table pedestal base bottom diameter | 300 mm | |
| Side table top thickness | 20 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Single lounge chair net weight | 28 kg | |
|---|---|---|
| Single lounge chair recommended static load capacity | 200 kg | |
| Seat cushion foam density (comfort layer) | 28 kg/m³ | |
| Seat base foam density (support layer) | 28 kg/m³ | |
| Foam rebound rate | 60% | |
| Fabric abrasion resistance (Martindale) | 40000 cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Chair outer upholstery | Matte velvet fabric, 350g/㎡ weight | |
|---|---|---|
| Chair internal frame | 18mm thick kiln-dried pine + plywood frame | |
| Chair seat padding | Multi-layer high-density polyurethane foam | |
| Seat cushion support layer | 28kg/m³ firm polyether foam | |
| Chair bottom base | Non-slip felt floor protection pads | |
| Side table top | Smooth matte white engineered wood with wear-resistant lacquer finish | |
| Side table pedestal base | White matte fluted resin/MDF composite with vertical ribbing | |
| Seam construction | Concealed stitched seams with 8mm stitch pitch | |
| Side table base foot pads | Non-slip rubber floor protectors | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Seating orientation | Fixed upright lounge posture, no recline or tilt adjustment | |
|---|---|---|
| Mobility | Lightweight floor-placed design for easy repositioning, no fixed installation required | |
| Side table function | Static flat top for placing drinks, books and decorative objects | |
| Back support | Encircling wrap-around curved back for lumbar and lateral support | |
| Floor protection | Integrated anti-scratch pads under chair and table bases | |
| Upholstery care | Spot-clean only with mild fabric detergent, non-removable covers | |
| Seating capacity | 1 adult user per lounge chair, total 2 seats per set | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential living room casual seating | Pairs with round area rug for conversation nook in open-plan living spaces | |
|---|---|---|
| Apartment reading corner | Sized for compact urban apartments as a dedicated single-seat reading spot | |
| Lobby waiting area seating | Suitable for boutique hotel or office lobby casual reception waiting zones | |
| Bedroom accent seating | Placed at foot of bed or beside wardrobe for dressing and relaxation | |
| Complementary side table use | Positioned between chairs for shared surface access during seated use | |
| Recommended configuration | Pair two chairs with one side table for balanced symmetrical seating layout | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Upholstered furniture strength | EN 12520:2015 | |
|---|---|---|
| Table surface performance | EN 15185:2011 | |
| Furniture stability | EN 1022:2018 |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| Upholstered furniture safety | GB/T 3324 | |
|---|---|---|
| Upholstered seating durability | GB/T 28007 | |
| Furniture surface finish | GB/T 4893.1 | |
| Formaldehyde emission | GB 18584 |
This product must meet the following technical requirements: 1. Upholstered furniture safety: GB/T 3324; 2. Upholstered seating durability: GB/T 28007; 3. Furniture surface finish: GB/T 4893.1; 4. Formaldehyde emission: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
