| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2490 x 1020 x 920 mm | |
|---|---|---|
| Seat height from floor | 510 mm | |
| Individual seat cushion width | 670 mm | |
| Seat depth (front to back) | 640 mm | |
| Back cushion total height | 480 mm | |
| Armrest height above seat | 160 mm | |
| Under-sofa floor clearance | 150 mm | |
| Armrest width at outer edge | 100 mm | |
| Throw pillow dimensions (large back) | 650 x 650 mm | |
| Throw pillow dimensions (small front) | 500 x 500 mm | |
| Seat cushion thickness | 190 mm | |
| Armrest wrap panel thickness | 12 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static weight capacity | 408 kg | |
|---|---|---|
| Per-seat static weight capacity | 136 kg | |
| Seat foam density | 45 kg/m³ | |
| Seat foam rebound rate | 60% | |
| Back cushion fill density (feather-fiber blend) | 30 kg/m³ | |
| Upholstery fabric abrasion resistance | 45000 Martindale cycles | |
| Seam stitch pitch | 3 stitches per cm | |
| Sinuous spring wire gauge | 8 gauge | |
| Product net weight | 76 kg | |
| Frame warranty period | 10 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Internal load-bearing frame | Kiln-dried solid hardwood with glued corner blocks | |
|---|---|---|
| Seat suspension system | 8-gauge sinuous steel springs spaced 100mm apart | |
| Main body upholstery | Off-white textured woven polyester-linen blend fabric | |
| Armrest construction | Rigid curved panel wrapped in saddle brown top-grain leather | |
| Seat cushion fill | High-resilience polyurethane foam wrapped in dacron fiber | |
| Back and throw cushion fill | Down-feather and polyester fiber blend for soft sink-in feel | |
| Support legs | Polished chrome-plated solid steel V-shaped cantilever legs | |
| Cushion edge detail | Thin saddle brown contrast piping along all cushion seams | |
| Under-seat base panel | Reinforced engineered wood support board covered in brown edge trim | |
| Fastener hardware | Zinc-plated steel bolts and brackets for leg assembly | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Cushion configuration | Three independent divided seat cushions with layered loose back cushions | |
|---|---|---|
| Cushion cover design | Zippered removable cushion covers for spot cleaning or reupholstery | |
| Seat support performance | Sinuous spring suspension provides even weight distribution across full seat width | |
| Leg assembly | Tooled bolt-on attachment of V-shaped metal legs for knockdown shipping | |
| Armrest function | Curved wrapped armrests provide padded lateral support at seated elbow height | |
| Floor protection | Recessed floor glides on each leg base to prevent hard floor scratching | |
| Seating capacity | Accommodates 3 average-sized adults with individual seat alignment | |
| Cushion reversibility | Seat cushions are double-sided and reversible for even wear over time | |
| Under-base clearance | Open clearance under seat allows robot vacuum access and air circulation | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room primary seating | Sized for 3-person use in open-plan or dedicated living spaces | |
|---|---|---|
| Modern office reception lounge | Sleek minimalist design fits contemporary corporate waiting areas | |
| High-end residential lounge or den | Mixed fabric-leather finish complements luxury neutral interior palettes | |
| Hotel suite guest seating area | Low-profile elegant form aligns with boutique hotel furnishing standards | |
| Open coworking space break area | Durable upholstery and plush cushions support extended casual seating | |
| Pairing recommendation | Works with matching low-profile coffee tables 450 mm in height for proportional balance | |
| Floor surface compatibility | Suitable for hard wood, tile, and low-pile carpeted floors with included glides |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Domestic furniture seating strength, durability and safety requirements | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability test standard |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal frame construction | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, required for indoor residential use | |
| GB/T 1952.1-2012 | Test methods for sofas, applicable to seating durability and strength verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal frame construction; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, required for indoor residential use; 3. GB/T 1952.1-2012: Test methods for sofas, applicable to seating durability and strength verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
