| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3400 x 1460 x 850 mm | |
|---|---|---|
| Seat height | 500 mm | |
| Seat depth per section | 700 mm | |
| Backrest height | 420 mm | |
| Platform base height | 120 mm | |
| Throw pillow dimensions | 450 x 250 mm | |
| Seat cushion thickness | 280 mm | |
| Back cushion thickness | 180 mm | |
| Seat section width | 1700 mm | |
| Back section width | 1700 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total sofa weight | 180 kg | |
|---|---|---|
| Per-seat static load capacity | 159 kg | |
| Fabric Martindale abrasion resistance | 30000 cycles | |
| Fabric lightfastness rating | Level 5 | |
| Seat cushion compression set | 8% | |
| Foam density for seat cushions | 45 kg/m³ | |
| Seat cushion rebound rate | 60% | |
| Frame joint static load durability | 50000 cycles | |
| Warranty period for frame | 10 years | |
| Seat foam density | 45 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Internal structural frame | Kiln-dried solid pine wood | |
|---|---|---|
| Seat support system | 80mm serpentine springs + 50mm elastic webbing | |
| Seat cushion core fill | High-density polyurethane foam + down wrap | |
| Back cushion fill | High-density polyurethane foam + polyester fiber fill | |
| Outer upholstery fabric | Matte soft-wrinkle performance fabric | |
| Enclosed platform base | Engineered wood wrapped in matching upholstery fabric | |
| Throw pillow fill | 100% polyester fiber fill | |
| Tufted back fasteners | Polished metal tufting buttons | |
| Seam stitch pitch | 8 stitches per 30mm | |
| Fabric face weight | 320 gsm | |
| Seam stitch construction | Reinforced polyester thread, 8 stitches per 30mm pitch | |
| Frame moisture content | 12% |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed four-seat straight layout | |
|---|---|---|
| Backrest angle | 105 degrees | |
| Cushion design | Removable seat and back cushions | |
| Throw pillow support | Two matching rectangular lumbar pillows included | |
| Base design | Fixed enclosed low platform base | |
| Surface clearance | Full floor contact base design | |
| Upholstery attachment | Fixed non-removable fabric covers on frame and base | |
| Stability design | Split two-section connected frame | |
| Lumbar support | Two matching rectangular throw pillows included | |
| Frame assembly | Two-section bolt-connected split frame | |
| Upholstery cover design | Fixed non-removable fabric covers on frame and base, zippered removable cushion covers | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room | Primary seating for open-plan modern minimalist home living spaces | |
|---|---|---|
| Lounge reception areas | Soft casual seating for office, hotel, or boutique waiting spaces | |
| Studio apartment seating | Armless profile maximizes seating capacity in narrow floor plans | |
| Design showrooms | Statement orange upholstery suitable for modern furniture display settings | |
| Open-plan lounge spaces | Low-profile design does not block sightlines across open interiors | |
| Home media rooms | Deep plush seats support extended relaxed seated viewing use | |
| Residential open-plan living room | Primary statement seating for modern minimalist home spaces, low profile avoids sightline blockage | |
| Boutique hotel lounge reception | Casual soft seating for lobby or guest waiting areas, bold orange adds design accent |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Applies to strength, durability and safety requirements for domestic seating | |
|---|---|---|
| EN 1021-1:2014 | Applies to upholstered furniture cigarette ignition resistance testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applies to general technical requirements for wooden furniture frames | |
|---|---|---|
| GB 18584-2001 | Applies to formaldehyde emission limits for wooden furniture components | |
| GB/T 1952.1-2012 | Applies to strength and durability test methods for sofas | |
| GB 20400-2006 | Leather/fabric upholstery material safety limits |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applies to general technical requirements for wooden furniture frames; 2. GB 18584-2001: Applies to formaldehyde emission limits for wooden furniture components; 3. GB/T 1952.1-2012: Applies to strength and durability test methods for sofas; 4. GB 20400-2006: Leather/fabric upholstery material safety limits; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
