| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2940 x 925 x 690 mm | |
|---|---|---|
| seat height | 460 mm | |
| seat depth (deep lounge) | 670 mm | |
| armrest height | 610 mm | |
| armrest width | 200 mm | |
| integrated side table dimensions | 500 x 800 x 610 mm | |
| support foot height | 80 mm | |
| seat cushion thickness | 165 mm | |
| throw pillow dimensions | 500 x 500 mm | |
| channel-seat segment width | 150 mm | |
| floor clearance under sofa base | 80 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| per-seat static load capacity | 227 kg | |
|---|---|---|
| product net weight | 135 kg | |
| fabric Martindale abrasion resistance | 72500 cycles | |
| seat foam density | 45 kg/m³ | |
| seat foam rebound rate | 60% | |
| back cushion fill density | 30 kg/m³ | |
| seam stitch pitch | 30 mm | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| inner load-bearing frame | Kiln-dried solid pine wood frame, 30 mm section thickness | |
|---|---|---|
| seat support system | 80 mm pitch sinuous steel springs + 10 mm elastic webbing | |
| upholstery fabric | 380 g/sqm polyester-linen blend woven fabric, matte beige finish | |
| seat cushion core | 165 mm thick high-resiliency polyurethane foam, wrapped with 20 mm dacron layer | |
| back cushions/throw pillows | Hollow siliconized fibre fill, removable fabric covers | |
| integrated middle side table | Dark walnut-look engineered wood veneer top, open lower storage shelf | |
| support feet | 25 mm diameter matte black powder-coated metal feet, non-marking floor caps | |
| modular connection hardware | Heavy-gauge steel connecting brackets between seating modules and table | |
| armrest padding | 200 mm thick high-density foam padding over wood arm frame | |
| base trim | Matte dark metal perimeter trim along bottom edge of sofa frame | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| modular configuration | Two two-seat modules connected via steel brackets with integrated middle side table | |
|---|---|---|
| cushion cover maintenance | Zippered removable seat and back cushion covers for spot cleaning or washing | |
| integrated table function | Dark wood side table with open lower shelf for books, decor, and beverage placement | |
| seating capacity | Four individual seating positions for multiple adult users | |
| channel-tufted seat design | Vertical channel stitching on right module prevents cushion fill shifting over use | |
| floor protection | Non-marking rubber foot caps prevent scuffing on hard floor surfaces | |
| modular reconfiguration | Modules can be disconnected to rearrange layout or replace the integrated table unit | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| residential living room use | Large open-plan modern living rooms for family and guest seating | |
|---|---|---|
| high-end lounge common areas | Luxury apartment lounges, designer office reception areas, high-end residential model homes | |
| contemporary interior schemes | Minimalist, wabi-sabi, modern cream-style interiors matching light neutral upholstery | |
| low lounge layout configuration | Placed against large open walls to accommodate the full extended length of the sofa | |
| paired decor recommendation | Pair with low-profile rectangular coffee tables, neutral textured area rugs, and minimal decorative objects |
EU Market Access Requirements* EN Standards
| upholstered furniture safety standard | EN 1725:1998 Domestic furniture – Seating – Safety requirements | |
|---|---|---|
| upholstered furniture durability standard | EN 12520:2015 Furniture – Strength, durability and safety for domestic seating |
Standards applicable to China-market projects
| upholstered furniture safety standard | GB/T 3324General technical requirements for wooden furniture | |
|---|---|---|
| formaldehyde emission limit | GB 18584Indoor decoration materials limited harmful substances in wooden furniture |
This product must meet the following technical requirements: 1. upholstered furniture safety standard: GB/T 3324General technical requirements for wooden furniture; 2. formaldehyde emission limit: GB 18584Indoor decoration materials limited harmful substances in wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
