| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2600 x 1080 x 1016 mm | |
|---|---|---|
| seat height | 457 mm | |
| seat depth per position | 572 mm | |
| seat width per position | 673 mm | |
| backrest height above seat | 559 mm | |
| armrest width | 290 mm | |
| armrest height above floor | 610 mm | |
| minimum entry door clearance | 635 mm | |
| footrest extension length | 495 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| net weight | 227 kg | |
|---|---|---|
| static weight capacity per seat | 159 kg | |
| total static weight capacity | 476 kg | |
| backrest recline angle range | 160 degrees | |
| foam density (seat cushions) | 35 kg/m³ | |
| foam density (backrest cushions) | 28 kg/m³ | |
| upholstery abrasion resistance | 50000 Martindale cycles | |
| seat spring coil count | 27 coils per seat | |
| limited warranty period | 6 months | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
Core acceptance fields · Panels / hardware / frame / upholstery
| external upholstery | 1.0 mm thick black polyurethane faux leather | |
|---|---|---|
| seat cushion filling | High-resiliency polyurethane foam wrapped in 200g polyester fiber | |
| seat support core | Individually wrapped 1.8 mm steel pocket coil springs | |
| internal load frame | Kiln-dried 40 mm hardwood with 1.5 mm steel reinforcement brackets | |
| recline mechanism | Powder-coated cold-rolled steel manual latch assembly | |
| backrest cushion filling | 28 kg/m³ polyurethane foam wrapped in non-woven fabric | |
| armrest construction | Fully padded, curved rolled design with foam core over rigid wood frame | |
| base feet | 50 mm tall black polymer hidden low-profile feet | |
| upholstery stitching | Reinforced bonded polyester thread at 8 stitches per inch | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| independent seat recline | Two outer seats recline via side pull lever, middle seat remains fixed | |
|---|---|---|
| footrest operation | Pull lever releases integrated footrest, which locks in extended position | |
| backrest adjustment | Lean back against backrest after lever release to adjust to preferred angle | |
| upright seating position | Fixed 105° back angle for formal seating when footrest is fully retracted | |
| tool-free final assembly | Back sections slide and lock onto pre-assembled base unit | |
| non-marring floor protection | Hidden polymer feet prevent scuffing on low-pile carpet and hard flooring | |
| split back support design | Three separate segmented back cushions provide independent lumbar support | |
| seat contouring | Dual recessed seat cushion design promotes neutral seated posture | |
| fully reclined overall depth | 1575 mm | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| executive office lounge | Formal black finish provides professional appearance for informal client meetings | |
|---|---|---|
| modern residential living room | Low-profile curved arm design complements minimalist contemporary interior decor | |
| home theater media room | Reclining function supports extended viewing comfort with extended footrest support | |
| corporate reception waiting area | Three-seat capacity accommodates multiple visitors with easy-clean upholstery | |
| breakout collaboration space | Seating supports 3 users for casual team discussions or short rest breaks | |
| private executive office | Placed against a wall to provide additional guest seating opposite an executive desk |
EU Market Access Requirements* EN Standards
| EN 1335:2000 | Office furniture seating strength and stability standards, applicable for office lounge use | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability requirements for upright and reclined positions |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal hardwood frame structure | |
|---|---|---|
| GB 20400-2006 | Leather and fur safety limits for harmful substances, applicable to faux leather upholstery | |
| GB/T 1952.1-2012 | Strength and durability test methods for sofas, applicable to static load and recline mechanism testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal hardwood frame structure; 2. GB 20400-2006: Leather and fur safety limits for harmful substances, applicable to faux leather upholstery; 3. GB/T 1952.1-2012: Strength and durability test methods for sofas, applicable to static load and recline mechanism testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
