| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3300 x 1400 x 940 mm | |
|---|---|---|
| Seat height | 470 mm | |
| Left module seat depth | 710 mm | |
| Right chaise module seat depth | 1100 mm | |
| Armrest width | 200 mm | |
| Armrest height | 620 mm | |
| Back cushion dimensions | 700 x 700 x 180 mm | |
| Throw cushion dimensions | 500 x 500 mm | |
| Support foot height | 30 mm | |
| Seat cushion thickness | 220 mm | |
| Armrest thickness | 200 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static load capacity | 454 kg | |
|---|---|---|
| Net weight | 110 kg | |
| Seating capacity | 3 persons | |
| Seat foam density | 55D | |
| Back foam density | 35D | |
| Fabric abrasion resistance | 30000 Martindale cycles | |
| Seam pitch | 30 mm | |
| Foam rebound rate | 60% | |
| Frame warranty | 10 years | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery fabric | Light gray textured woven linen-blend fabric | |
|---|---|---|
| Seat cushion fill | Multi-layer high-resilience foam wrapped in soft fiber | |
| Back cushion fill | Blown polyester fiber wrap over foam core | |
| Internal frame | Kiln-dried engineered hardwood with corner blocking | |
| Support feet | Dark powder-coated slim steel cylinder feet | |
| Seat support system | 8-gauge sinuous springs with polypropylene webbing | |
| Quilted seat detailing | Channel-stitched fabric over segmented foam cores | |
| Throw pillow cover | Dark gray textured woven accent fabric | |
| Module connectors | Powder-coated steel bracket clips | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| Modular reconfiguration | Interchangeable modules secured via metal bracket clips | |
|---|---|---|
| Cushion removability | Loose seat and back cushions with removable zippered covers | |
| Chaise lounging | Right-side extra-deep seat module supports full leg extension | |
| Floor protection | Slim metal feet with non-marking plastic glides | |
| Accent pillow support | Included matching and contrast throw pillows for lumbar support | |
| Low-profile access | 30mm foot clearance allows easy cleaning under the sofa | |
| Modular expansion | Additional same-width modules can be added to extend length | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Modern living room lounge | Suitable for open-plan residential living spaces requiring deep lounge seating | |
|---|---|---|
| Apartment small-space configuration | Low-profile linear form fits compact urban living rooms without blocking sightlines | |
| Neutral contemporary interiors | Light gray fabric finish complements minimalist, wabi-sabi or Scandinavian decor | |
| Casual reception areas | Appropriate for low-traffic office breakout spaces or creative studio lounges | |
| Media room seating | Deep chaise module supports relaxed reclining for long viewing sessions | |
| Recommended configuration | Pair with low-profile rectangular coffee tables 400 mm lower than seat height |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture - Strength, durability and safety for domestic seating | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability resistance for smouldering cigarettes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal frame quality | |
|---|---|---|
| GB 18584-2001 | Indoor decorating material limit of harmful substances for wood furniture | |
| GB/T 19817-2005 | Upholstered furniture general safety and performance requirements |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal frame quality; 2. GB 18584-2001: Indoor decorating material limit of harmful substances for wood furniture; 3. GB/T 19817-2005: Upholstered furniture general safety and performance requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
