| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall sofa dimensions (L-shaped configuration) | 3200 x 2000 x 750 mm | |
|---|---|---|
| Single seat module dimensions | 1050 x 1050 x 750 mm | |
| Chaise/ottoman module dimensions | 1280 x 1280 x 400 mm | |
| Seat height from floor | 420 mm | |
| Seat depth (usable per seat) | 730 mm | |
| Wide square armrest width | 250 mm | |
| Integrated low backrest height | 330 mm | |
| Floor clearance under sofa | 50 mm | |
| Throw pillow dimensions (5 included) | 600 x 600 mm | |
| Round red lacquer coffee table dimensions | 900 x 380 mm (diameter x height) | |
| Round stone-top side table dimensions | 500 x 600 mm (diameter x height) | |
| Coffee table lower shelf diameter | 800 mm | |
| Side table pedestal base floor plate diameter | 300 mm | |
| Sofa leather upholstery panel tuft grid size | 450 x 450 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm |
Net weight / load capacity / users / durability
| Sofa total net weight (3-seat + chaise) | 180 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Seat cushion core foam density | 45D | |
| Seat foam rebound rate | 60% | |
| Leather upholstery thickness | 1.8 mm | |
| Leather Martindale abrasion resistance | 50000 double rubs | |
| Red lacquer coating scratch resistance | 2H pencil hardness | |
| Stone side table top heat resistance | 120 °C | |
| Recommended seating capacity | 4 people | |
| Seat cushion durability (compression set) | 5% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Sofa internal frame | Kiln-dried solid pine/hardwood frame, blocked, glued and nailed corner joints, 30mm frame section thickness | |
|---|---|---|
| Sofa seat support system | 3.8mm diameter sinusoidal steel springs spaced 100mm apart, plus 50mm wide elastic webbing cross support | |
| Sofa seat cushion filling | 45D high-resilience polyurethane foam core with 20mm thick latex topper, wrapped in 200g non-woven fabric | |
| Sofa upholstery material | 1.8mm thick black top-grain semi-aniline leather, biscuit tufted construction with matched stitching | |
| Sofa stitching details | UV-bonded polyester thread, 8 stitches per 30mm seam pitch, tufting buttons secured with internal steel ties | |
| Sofa connecting hardware | Powder-coated steel alligator clip connectors between modules, M8 mounting bolts for arm attachment | |
| Sofa feet | 20mm high black matte plastic hidden block feet, non-marking, installed at each module corner | |
| Throw pillow construction | Textured light beige boucle fabric cover, filled with 100% 3D hollow fiberfill, hidden zipper closure | |
| Coffee table structure | 18mm thick MDF substrate with high-gloss red PU lacquer finish, 40mm diameter black powder-coated steel support legs, 12mm thick smoked glass lower circular shelf | |
| Side table structure | 12mm thick sintered stone/natural marble round top with polished natural veined finish, 50mm diameter brushed gunmetal carbon steel single pedestal base with circular floor plate | |
| Metal component finish (table bases) | Anti-rust powder coating/plating, salt spray resistance 48 hours for indoor use | |
| Sofa backrest filling | 35D medium-density polyurethane foam wrapped in 150g polyester batting, secured to frame with hook-and-loop fasteners |
Adjustment / rotation / tilt / mobility / storage features
| Modular reconfiguration | Steel alligator clip connectors allow modules to be connected, separated or rearranged into alternative configurations including straight, L-shape or open chaise layouts, 2-person operation without specialized tools | |
|---|---|---|
| Tufted seat structure | Biscuit tufting secures leather upholstery evenly across seat surfaces to prevent shifting, creates structured 450x450mm tufted panels for consistent visual alignment | |
| Integrated wide armrests | Fully upholstered square armrests provide 250mm wide flat arm support, no separate removable arm pads, consistent padding density with seat cushions | |
| Low-back lounge support | One-piece integrated low backrest with uniform foam padding provides lumbar support for relaxed lounge seating, no adjustable headrests or recline mechanisms | |
| Chaise lounge extension | Extended chaise/ottoman module provides full leg support for extended reclined seating, can be positioned on left or right side of main sectional via modular connectors | |
| Surface protection (sofa feet) | Non-marking plastic feet prevent scratching of hard floor surfaces including tile, wood and polished stone, no floor glides required for indoor use | |
| Coffee table dual surface | Upper high-gloss red lacquer top holds beverage and display items, lower smoked glass circular shelf provides additional open storage for books or decor items | |
| Side table placement flexibility | Single pedestal base with small circular floor footprint allows positioning directly adjacent to sofa arms or between seating modules without obstructing leg room | |
| Table assembly | Coffee table legs and side table pedestal base attach to tabletops via M6 pre-installed threaded inserts, assembly with included hex key requires no additional tools | |
| Throw pillow adjustability | 5 included 600x600mm boucle throw pillows are not fixed to the sofa frame, can be repositioned across seat and back modules for adjustable lumbar or neck support, removable covers for spot cleaning | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Modern minimalist residential living rooms | Low-profile black tufted design complements neutral, industrial, mid-century or contemporary interior schemes, sized for 40sqm open plan living spaces | |
|---|---|---|
| Luxury apartment lounge areas | High-gloss lacquer coffee table and stone side table add material contrast, suitable for upscale urban apartment settings where space allows L-shaped seating layout | |
| Hospitality reception lounge areas | Durable leather upholstery and structured modular design are suitable for low-traffic boutique hotel lobbies, private lounge areas or executive reception spaces, rated for 4-person seating capacity | |
| Open-plan studio loft spaces | Low-back profile does not block sight lines across open floor plans, modular design allows layout adjustment to fit irregular room shapes | |
| Recommended complementary configuration | Pair with low-pile area rug, additional occasional seating, and minimalist floor lighting to maintain uncluttered modern aesthetic; avoid tall overhead storage that blocks the low sofa silhouette | |
| User group recommendation | Suitable for adult users seeking relaxed lounge seating with firm, supportive cushioning; not recommended for high-traffic commercial spaces with daily heavy public use | |
| Boutique hospitality reception lounge areas | Durable 50000 double rub leather upholstery and structured modular design are suitable for low-traffic boutique hotel lobbies, private executive lounge areas or upscale co-working reception spaces, rated for 4-person seating capacity, with scratch-resistant table tops for daily guest use |
EU Market Access Requirements* EN Standards
| EN 12520:2015 Furniture - Strength, durability and safety - Requirements for domestic seating | Applies to residential sofa, specifies static load, fatigue, impact and stability requirements for household seating | |
|---|---|---|
| EN 1022:2018 Domestic furniture - Seating - Determination of stability | Applies to sofa, specifies test methods and requirements for forward, sideways and rearward stability of seating | |
| EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables | Applies to coffee table and side table, specifies structural strength, durability and safety requirements for indoor tables | |
| EN 13356:2008 Furniture - Test methods for surfaces - Assessment of resistance to cold liquids | Applies to lacquer coffee table and stone side table tops, specifies test methods for resistance to beverage and household chemical spills for indoor furniture surfaces |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to wooden frame sofa and lacquer coffee table substrate, specifies dimensional tolerance, finish adhesion, structural strength requirements for indoor wooden furniture | |
|---|---|---|
| GB 20400-2006 Leather and fur - Limit of harmful matter | Applies to sofa leather upholstery, specifies limits for formaldehyde, banned azo dyes and heavy metals in leather used for furniture | |
| GB/T 16799-2008 Furniture leather | Applies to sofa upholstery leather, specifies thickness, tear strength, abrasion resistance and color fastness requirements for furniture grade leather | |
| GB/T 3325-2017 General technical requirements for metal furniture | Applies to metal base side table and metal sofa hardware, specifies welding quality, coating adhesion, structural stability requirements for metal furniture components | |
| GB/T 35607-2017 Green product evaluation - Furniture | Applies to full furniture set, specifies limits for VOC emissions, hazardous substance content and material sustainability requirements for indoor furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to wooden frame sofa and lacquer coffee table substrate, specifies dimensional tolerance, finish adhesion, structural strength requirements for indoor wooden furniture; 2. GB 20400-2006 Leather and fur - Limit of harmful matter: Applies to sofa leather upholstery, specifies limits for formaldehyde, banned azo dyes and heavy metals in leather used for furniture; 3. GB/T 16799-2008 Furniture leather: Applies to sofa upholstery leather, specifies thickness, tear strength, abrasion resistance and color fastness requirements for furniture grade leather; 4. GB/T 3325-2017 General technical requirements for metal furniture: Applies to metal base side table and metal sofa hardware, specifies welding quality, coating adhesion, structural stability requirements for metal furniture components; 5. GB/T 35607-2017 Green product evaluation - Furniture: Applies to full furniture set, specifies limits for VOC emissions, hazardous substance content and material sustainability requirements for indoor furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
