| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 2800 x 1000 x 700 mm | |
|---|---|---|
| Seat height from floor | 460 mm | |
| Seat depth (front edge to back cushion face) | 820 mm | |
| Single modular seat unit width | 900 mm | |
| Armrest height (from seat surface to arm top) | 150 mm | |
| Back cushion height (from seat surface to cushion top) | 240 mm | |
| Recessed metal plinth base height | 50 mm | |
| Armrest width (outer edge to seat face) | 200 mm | |
| Back cushion thickness | 200 mm | |
| Quilted grid seat cushion panel size | 200 x 200 mm | |
| Seat Cushion Thickness | 180 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total sofa net weight | 145 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Seat core foam density | 50 kg/m³ | |
| Seat cushion foam rebound rate | 60% | |
| Seat suspension elastic webbing width | 50 mm | |
| Standard upholstery abrasion resistance (Martindale) | 50000 cycles | |
| Seam stitch pitch | 8 stitches per 30 mm | |
| Recommended number of seated users | 3 | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Internal load-bearing frame | Kiln-dried solid larch hardwood + 15mm thick multilayer plywood, glued and screwed for structural rigidity | |
|---|---|---|
| Seat base suspension | 50mm wide high-tension elastic webbing, 80mm spacing across seat frame, secured with metal staples | |
| Seat cushion core | 50D high-resilience polyurethane foam, wrapped in 20mm thick Dacron fiber layer with optional goose down top layer for softness | |
| Back cushion fill | Blown polyester fiber + 10% down feather blend, encased in non-woven liner, removable for cover care | |
| Seat and arm upholstery | 1.4mm thick top-grain cowhide leather (taupe and dark brown two-tone) or equivalent high-martindale performance fabric, uniform grid quilted with foam underlay for tufted definition | |
| Recessed base frame | 2mm thick powder-coated matte black steel continuous plinth, recessed 30mm inward from sofa outer edge to create floating appearance | |
| Modular connection hardware | Zinc-plated steel clip connectors with locking tabs, installed between adjacent modules to prevent shifting during use | |
| Armrest internal padding | 40D molded polyurethane foam, 100mm total padding thickness, shaped to match blocky rectangular arm profile | |
| Seat panel underlay | 5mm thick hardboard support panel over webbing to prevent cushion sag and maintain even quilted grid appearance | |
| Upholstery stitching thread | Bonded nylon thread, UV and abrasion resistant, color-matched to each upholstery tone for clean finished seams | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Modular reconfiguration | Tool-free metal clip connectors allow modules to be separated and reconnected into straight, L-shaped or open island layouts; compatible with additional armless, corner or ottoman modules from the same collection | |
|---|---|---|
| Fixed seat platform | Padded quilted seat is integrated with the armrest frame for a rigid, uniform block silhouette; seat cushions are semi-fixed to frame to maintain grid alignment during use | |
| Loose adjustable back cushions | Non-mechanical overstuffed back cushions can be repositioned along the seat back for customized lumbar support, or removed for conversion to a deep lounging daybed surface | |
| Low-profile plinth support | Continuous recessed steel plinth distributes weight evenly across the floor without separate legs, eliminating wobble and creating a clean minimalist floating visual effect | |
| Quilted tufted seat surface | Evenly spaced grid stitching creates defined padded square panels that retain shape and prevent upholstery shift with regular use | |
| Floor protection | Recessed base underside is fitted with 3mm thick non-marking felt glides along all contact edges to prevent scratching hard flooring surfaces | |
| Two-tone upholstery configuration | Factory-finished contrasting taupe and dark brown upholstery across adjacent modules creates a designer two-tone visual effect without requiring custom on-site upholstery | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 4 | |
|---|---|---|
| Largest carton dimensions | 1300 x 1050 x 650 mm | |
| Total shipping gross weight | 170 kg | |
| Total shipping volume (CBM) | 2.1 | |
| Required assembly time (2 persons) | 50 minutes | |
| 40ft HQ container loading quantity (assembled configuration) | 42 units | |
| Packaging protection | 50mm thick EPE foam wrapping on all upholstered surfaces, hard cardboard corner protectors, 5-layer corrugated outer cartons, plastic hardware bag with assembly instructions | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm |
Recommended spaces / users / usage modes
| Residential living room main seating | Suitable for open-concept or formal living rooms, designed for relaxed daily lounging and guest seating with deep seat depth and plush back support | |
|---|---|---|
| Modern minimalist / contemporary interior schemes | Complements neutral, monochrome or warm-toned interiors with its clean blocky silhouette, matte metal base and two-tone neutral upholstery palette | |
| Luxury apartment / loft open-plan spaces | Low-profile form does not block sight lines in open-plan layouts, while the wide sectional scale provides ample seating for entertaining | |
| High-end residential reception / lounge areas | Designer two-tone finish and premium upholstery appearance is appropriate for upscale private lounge spaces, home media rooms or executive residential reception areas | |
| Flooring compatibility | Suitable for installation over hardwood, tile, polished concrete or low-pile area rugs; felt glides prevent floor damage, and the continuous plinth base distributes weight evenly to avoid indentation on soft flooring | |
| Configuration flexibility for different room sizes | Modular design allows extension with additional modules or adjustment to L-shape to fit small to large living spaces, from compact 2-seat layouts to large multi-seat sectionals |
EU Market Access Requirements* EN Standards
| EN 12520:2015 Furniture - Strength, durability and safety - Requirements for domestic seating | Applies to structural strength, stability, load testing and safety performance for residential sofa use | |
|---|---|---|
| EN 1021-1:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette | Applies to minimum fire resistance requirements for upholstery and fill materials for residential seating |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for furniture: Wooden furniture | Applies to the internal wooden frame structural strength, dimensional stability and finish quality requirements for the sofa frame | |
|---|---|---|
| GB 20400-2006 Leather and fur - Limit of harmful matter | Applies to leather upholstery options, setting maximum limits for formaldehyde, azo dyes and other harmful substances in contact upholstery | |
| GB/T 16799-2008 Furniture leather | Applies to material performance, color fastness, tear strength and thickness requirements for leather upholstery used on the sofa | |
| GB/T 1952.1-2012 Sofas | Applies to overall sofa structural durability, load capacity, foam performance, upholstery fastness and safety requirements for residential seating |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for furniture: Wooden furniture: Applies to the internal wooden frame structural strength, dimensional stability and finish quality requirements for the sofa frame; 2. GB 20400-2006 Leather and fur - Limit of harmful matter: Applies to leather upholstery options, setting maximum limits for formaldehyde, azo dyes and other harmful substances in contact upholstery; 3. GB/T 16799-2008 Furniture leather: Applies to material performance, color fastness, tear strength and thickness requirements for leather upholstery used on the sofa; 4. GB/T 1952.1-2012 Sofas: Applies to overall sofa structural durability, load capacity, foam performance, upholstery fastness and safety requirements for residential seating; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
