| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 4250 x 1630 x 860 mm | |
|---|---|---|
| Seat height | 500 mm | |
| Seat depth (main section) | 710 mm | |
| Chaise lounge width | 1100 mm | |
| Chaise lounge depth | 1630 mm | |
| Armrest height | 660 mm | |
| Back cushion height | 450 mm | |
| Seat cushion thickness | 180 mm | |
| Ground clearance | 50 mm | |
| Single seat module width | 950 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static load capacity | 450 kg | |
|---|---|---|
| Seat cushion foam density | 45 kg/m³ | |
| Back cushion fill density | 28 kg/m³ | |
| Fabric abrasion resistance | 50000 double rubs | |
| Seat foam rebound rate | 60% | |
| Frame static load durability | 50000 cycles | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat | |
| Upholstery Seam Pitch | 4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Inner frame | Kiln-dried solid pine wood with mortise-and-tenon reinforcement | |
|---|---|---|
| Upholstery fabric | Matte light gray 320g/m² performance fabric (tech cloth) | |
| Seat cushion core | High-resilience polyurethane foam wrapped in 20mm soft down blend | |
| Back cushion fill | Blown polyester fiber and down blend for soft layered support | |
| Armrest structure | Curved padded wood frame wrapped in foam and matching upholstery | |
| Base support feet | Hidden matte black ABS low feet with non-slip pads | |
| Seat support system | 80mm wide sinuous steel springs with 50mm spacing | |
| Stitching detail | Reinforced polyester thread with 30mm seam pitch | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options |
Adjustment / rotation / tilt / mobility / storage features
| Chaise configuration | Fixed right-side chaise lounge for extended leg rest | |
|---|---|---|
| Cushion design | Loose, reversible seat and back cushions for even wear | |
| Armrest function | Padded curved armrests on both ends provide arm support and side visual balance | |
| Cleaning access | Zippered removable cushion covers for spot cleaning or washing | |
| Modular connection | Heavy-duty metal bracket connectors hold seating modules firmly aligned | |
| Floor protection | Non-slip rubber pads on bottom feet prevent floor scratches and sliding | |
| Orientation option | Right-chaise layout as shown, factory customizable to left chaise | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Large open-plan living room | Fits 35m²+ living spaces as primary lounge seating facing media or coffee table | |
|---|---|---|
| Modern minimalist residential interior | Matches low-profile neutral gray aesthetic for contemporary, light luxury home design | |
| 5-person household seating | Accommodates 4 adults on main section plus 1 reclining on chaise for daily use | |
| High-end apartment lounge | Suitable for furnished luxury residential units with floor-to-ceiling window layouts | |
| Quiet lounge zone | Deep cushions support extended relaxed sitting for reading, conversation or media viewing |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Domestic furniture strength, durability and safety requirements for upholstered seating | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignition resistance to smouldering cigarettes for fire safety |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to inner frame and structural components | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, for formaldehyde emission control verification | |
| GB/T 1952.1-2012 | Test methods for upholstered sofas, applicable to strength and durability acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to inner frame and structural components; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, for formaldehyde emission control verification; 3. GB/T 1952.1-2012: Test methods for upholstered sofas, applicable to strength and durability acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
