| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 860 x 780 x 740 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Recommended user weight capacity | 160 kg | |
|---|---|---|
| Net weight | 28 kg | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Foam rebound value | 40% | |
| Fabric abrasion acceptance level | 30,000 Martindale cycles | |
| Static seat proof load | 320 kg | |
| Number of occupants | 1 | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Caramel boucle woven fabric with visible looped texture | |
|---|---|---|
| Seat cushion | 140 mm high-resilience polyurethane foam with fabric-wrapped soft layer | |
| Back padding | 28 kg/m3 polyurethane foam over a curved inner support | |
| Inner support frame | 25 mm engineered wood board with hardwood reinforcing blocks at side joins | |
| Side support panels | Upholstered engineered wood slabs acting as arms, legs and back supports | |
| Bottom protective rails | Light gray hard-wearing composite or plastic rails at each floor contact | |
| Seat underside | Black non-woven fabric dust cover with center seam visible below the seat bridge | |
| Fabric joint construction | Sewn and upholstered panel joints following the arm-to-back contours | |
| Suggested seam stitch pitch | 8 stitches per 50 mm | |
| Floor glide type | Full-width non-marking glide strip recessed into each base slab | |
| Internal fastening | M8 steel bolts and threaded inserts joining seat bridge to side slabs | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
| Seating posture | Relaxed upright lounge posture with 100-degree included seat-to-back angle | |
|---|---|---|
| Integrated arm support | Continuous fabric-covered side panels provide 190 mm arm support above the seat | |
| Structural support | Two floor-contacting slab panels carry the cantilevered seat and back without exposed legs | |
| Floor protection | Continuous light-colored glide rails reduce abrasion on carpet, wood and tile floors | |
| Movement restriction | Stationary chair with no swivel, rocking mechanism, casters or folding action | |
| Cleaning access | Open 120 mm floor gap permits robotic vacuum access under the seat bridge | |
| Upholstery maintenance | Fixed non-removable fabric cover requiring vacuuming and spot cleaning | |
| Assembly requirement | Two side slabs attach to the upholstered seat-back unit with concealed hardware | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Living room reading corner | Single lounge seat suited to a compact reading or conversation area beside a sofa | |
|---|---|---|
| Boutique hotel lobby | Soft sculptural form provides accent seating in lounges and guest reception zones | |
| Office breakout area | Fits informal touchdown or waiting spaces where users need relaxed upright support | |
| Bedroom dressing area | Works as an upholstered accent chair near a vanity, window or wardrobe wall | |
| Showroom display | Caramel boucle finish suits contemporary residential and hospitality staging displays | |
| Pairing configuration | Two chairs can face a coffee table to create a compact conversation setting | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
