| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Net weight | 24 kg | |
|---|---|---|
| Static seat load | 160 kg | |
| Recommended user weight | 120 kg | |
| Seating capacity | 1 person | |
| Back static load | 90 kg | |
| Arm downward load per side | 45 kg | |
| Foam density | 35 kg/m3 | |
| Foam rebound | 40% | |
| Warranty target | 36 months | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Pebble-grain leather-look fabric or microfiber leather with fine matte texture | |
|---|---|---|
| Upholstery thickness | 1.2 mm | |
| Seat cushion foam | 120 mm polyurethane foam at 35 kg/m3 | |
| Back padding | 60 mm polyurethane foam at 30 kg/m3 | |
| Internal molded shell | 18 mm curved plywood or high-density composite board | |
| Reinforcement frame | 25 x 25 mm square steel inner frame | |
| Floor-contact side panels | Upholstered rigid panels with concealed lower rails | |
| Seat support board | 12 mm bent composite or plywood deck | |
| Edge stitching | Polyester bonded thread with 8 stitches per 100 mm | |
| Bottom protection | Black non-woven fabric and 2 mm anti-slip floor pads | |
| Abrasion target | Martindale 30,000 cycles | |
| Color finish | Single mustard-yellow upholstery with matching thread |
Adjustment / rotation / tilt / mobility / storage features
| Wraparound posture support | Curved back and arms form an enclosed 860 mm wide resting zone for relaxed sitting | |
|---|---|---|
| Integrated armrest function | Each side panel rises from the floor and ends in a continuous 180 mm arm support | |
| Fixed lounge recline | Back is fixed at an 11-degree rearward lounge angle | |
| Freestanding installation | The chair rests directly on two broad upholstered side panels without bolts or wall fixing | |
| Single-unit seating | The seat, arms, and back are assembled into one non-folding molded chair | |
| Floor protection | Recommended concealed pads at four lower panel corners reduce slipping and floor abrasion | |
| Maintenance access | Bottom closure can be removed for frame inspection while the outer upholstery remains fixed | |
| Seat recovery | High-resilience cushion returns after normal compression without removable flip or tilt action | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Hotel lounge | Suitable for guestrooms and lobby corners where one compact accent chair provides relaxed seating | |
|---|---|---|
| Reception waiting area | Can be paired in groups of two to four for short waiting periods in offices or studios | |
| Residential living room | Fits reading corners, bay windows, or modern living rooms needing a bold yellow accent chair | |
| Bedroom dressing zone | Can serve as a lounge seat near a wardrobe or vanity due to its 420 mm seat height | |
| Showroom display | Useful for furniture exhibitions and interior displays emphasizing curved contemporary form | |
| Senior living lounge | Suitable for supervised low-intensity seating areas with 80 mm under-seat clearance | |
| Recommended pairing | Pair with a 450 to 550 mm round side table and low-pile rug | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| Furniture strength and durability | EN 16139 gives non-domestic seating strength and durability test methods | |
|---|---|---|
| Upholstered furniture flammability | EN 1021covers ignition by smouldering cigarette | |
| Match-flame ignition | EN 1021covers ignition by match-equivalent flame | |
| Leather upholstery | EN 13356 applies if supplier documents genuine leather upholstery |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| Upholstered furniture safety | GB/T 3324 applies as a dimensional and construction acceptance reference for wooden-frame furniture | |
|---|---|---|
| Formaldehyde emission | GB 18584 provides the indoor wooden-furniture formaldehyde limit for procurement testing | |
| Textile safety | GB 18401 Category C provides the basic technical textile safety reference |
This product must meet the following technical requirements: 1. Upholstered furniture safety: GB/T 3324 applies as a dimensional and construction acceptance reference for wooden-frame furniture; 2. Formaldehyde emission: GB 18584 provides the indoor wooden-furniture formaldehyde limit for procurement testing; 3. Textile safety: GB 18401 Category C provides the basic technical textile safety reference; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
