| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| net weight per chair | 24 kg | |
|---|---|---|
| recommended user weight capacity | 140 kg | |
| seat foam density | 35 kg/m3 | |
| back cushion foam density | 28 kg/m3 | |
| foam rebound | 40% | |
| fabric abrasion acceptance value | 30000 Martindale cycles | |
| upholstery load distribution | 1 person per chair | |
| base static floor load | 164 kg total | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| seat and back upholstery | Woven zebra-pattern textile in off-white and black | |
|---|---|---|
| seat front and outer border | Off-white smooth synthetic leather or leather-look upholstery | |
| seat cushion core | High-resilience polyurethane foam over an upholstered support deck | |
| back cushion construction | Layered polyurethane foam or fiber-filled pad with channeled upholstery | |
| internal load frame | Kiln-dried timber or engineered-wood frame, 30 mm nominal member thickness | |
| lower front panel | Black lacquered or painted wood-composite plinth panel | |
| side support plates | Brass-finished metal or metal-clad angled plates, 40 mm nominal thickness | |
| bottom trim | Brass-colored metal or metalized edge strip along the plinth front | |
| upholstery seam treatment | Self-piped or stitched edge seam at the seat perimeter | |
| underside protection | Felt or polymer floor glides at concealed plinth contact points | |
| fabric surface structure | Flat-woven upholstery with printed or woven continuous line pattern | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
| seating posture | Fixed upright-relaxed posture with a 100-degree back angle | |
|---|---|---|
| arm support | No arms, allowing side access and a compact conversation layout | |
| base stability | Full-width plinth and two angled brass side supports transfer load directly to the floor | |
| mobility | Non-swivel, non-reclining stationary chair intended for repositioning by lifting | |
| back support zones | Two-zone padded back provides upper-back and lumbar contact areas | |
| floor protection | Concealed glides should allow small repositioning movements without exposed wheels | |
| cleaning access | Armless form permits vacuuming or wiping around both sides with no arm hardware | |
| grouping method | Chairs face inward and can be paired with a 600 mm diameter side table | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| hotel lobby lounge | Use in pairs around a small brass table for short guest conversations | |
|---|---|---|
| corporate reception area | Place in waiting zones where bold zebra upholstery serves as a visual accent | |
| boutique retail lounge | Specify for fashion showrooms or premium retail fitting areas | |
| residential living room | Position as two accent chairs opposite a sofa or beside a coffee table | |
| cocktail or club lounge | Use around 600 mm drink tables in intimate two-person layouts | |
| bedroom dressing corner | Place one chair near a vanity or wardrobe corner for compact seating | |
| staging and interior display | Use for merchandising displays that require contemporary black, white and warm-metal coordination | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| upholstered furniture strength | EN 16139:2013 may be used for seating strength, durability and safety verification for non-domestic lounge seating | |
|---|---|---|
| flammability assessment | EN 1021 may be used for cigarette-ignition resistance when contract upholstery requirements apply |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| upholstered furniture safety applicability | GB/T 3324 may be used for general wooden furniture dimensional and structural quality checks | |
|---|---|---|
| fabric safety applicability | GB/T 17591 may be used for flame-retardant fabric requirements when the project specifies flame-retardant upholstery | |
| formaldehyde verification | GB/T 39600 may be used to specify limits for formaldehyde emission from wood-based panels |
This product must meet the following technical requirements: 1. upholstered furniture safety applicability: GB/T 3324 may be used for general wooden furniture dimensional and structural quality checks; 2. fabric safety applicability: GB/T 17591 may be used for flame-retardant fabric requirements when the project specifies flame-retardant upholstery; 3. formaldehyde verification: GB/T 39600 may be used to specify limits for formaldehyde emission from wood-based panels; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
