| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 740 x 760 x 820 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Suggested user weight capacity | 135 kg | |
|---|---|---|
| Product net weight | 18 kg | |
| Seating capacity | 1 adult | |
| Seat foam thickness | 100 mm | |
| Back foam thickness | 60 mm | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Static load verification target | 405 kg | |
| Recommended daily occupancy duration | 8 hours | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Woven houndstooth-pattern fabric with tight visible repeat across seat, arms, back, and side panels | |
|---|---|---|
| Fabric surface construction | Padded tailored upholstery with sewn corners and wrapped panel edges | |
| Seat cushion | Padded flexible cushion layer over a concealed load-bearing deck | |
| Backrest panel | Upholstered rigid panel with a central open cutout and continuous upper support | |
| Integrated armrests | Curved upholstered arm panels connected into the chair side structure | |
| Concealed internal frame | Hardwood-composite or plywood panel frame at 18 mm thickness | |
| Floor-contact base panels | Upholstered side panels forming two low support feet without exposed legs | |
| Edge protection | Concealed stiffeners inside the rounded arm nosings and front seat edge | |
| Under-seat support board | 12 mm structural board or webbing-supported deck | |
| Fabric abrasion procurement target | 30,000 Martindale cycles | |
| Fabric flammability construction | Standard residential textile without claimed flame-retardant treatment | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating posture | Fixed relaxed lounge posture with a 430 mm seat height and 12-degree angled backrest | |
|---|---|---|
| Arm support | Continuous integrated armrests provide 210 mm support above the seat and wrap around the front edge | |
| Back ventilation | The 350 x 130 mm open cutout separates the lower back from the arm structure and reduces visual bulk | |
| Floor support | Two broad upholstered side panels transfer load directly to the floor without separate legs or casters | |
| Mobility | Non-swiveling, non-tilting, and non-folding chair intended for stationary placement | |
| Space planning footprint | Requires a 740 x 760 mm floor footprint plus 300 mm rear access clearance for moving and cleaning | |
| Cleaning access | The open under-seat gap allows limited floor access beneath the front and side edges | |
| Upholstery attachment | Tailored fixed upholstery covers the structural shell and is not designed for tool-free removal by the user | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room reading corner | Placed as a standalone accent chair where the open back and 740 mm width provide compact lounge seating | |
|---|---|---|
| Hotel guest room | Suitable near a window or writing area for one guest and soft-interior design schemes | |
| Executive lounge | Pairs with a low coffee table in informal meeting or waiting zones | |
| Reception area | Useful in boutique offices and studios requiring a residential-style visitor chair | |
| Bedroom dressing area | Can serve as an accent seat at the foot of a bed or beside a vanity | |
| Retail showroom display | Suitable for furniture displays emphasizing houndstooth upholstery and rounded sculptural lines | |
| Senior living seating | Appropriate where stationary stability is preferred over swivel or caster seating | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
