| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall chair size | 770 x 813 x 960 mm | |
|---|---|---|
| Seat width | 559 mm | |
| Seat depth | 508 mm | |
| Seat height from floor | 470 mm | |
| Backrest height above seat | 490 mm | |
| Arm height from floor | 572 mm | |
| Front leg height | 210 mm | |
| Upholstered body width between arms | 570 mm | |
| Seat cushion thickness | 140 mm | |
| Back cushion thickness | 120 mm | |
| Channel pitch on backrest | 95 mm | |
| Floor clearance under front rail | 180 mm | |
| Leg footprint | 650 x 680 mm | |
| Arm pad width | 110 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 17.01 kg | |
|---|---|---|
| Recommended user load | 150 kg | |
| Seating capacity | 1 adult | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Foam rebound | 40% | |
| Internal spring static support | 150 kg | |
| Leg attachment pull-out resistance | 80 kg per leg | |
| Static back load test target | 91 kg | |
| Limited warranty | 12 months |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| External upholstery | Sage-green velvet face fabric with visible directional pile | |
|---|---|---|
| Seat padding | Polyurethane foam cushion, 140 mm thick, over spring-supported base | |
| Back padding | Molded polyurethane foam, 120 mm thick, divided by vertical channels | |
| Internal seat frame | Solid wood and manufactured-wood board frame, 18 mm target thickness | |
| Back support board | 12 mm engineered-wood panel or webbed support within upholstered wing | |
| Seat suspension | Sinuous springs or elastic webbing beneath foam pad | |
| Legs | Four tapered tubular metal legs with bronze-gold finish | |
| Metal tube specification | 25 mm diameter tapered tube with 1.2 mm target wall thickness | |
| Foot caps | Non-slip polymer glides attached to each leg | |
| Seam construction | Stitched vertical channel seams with 70 mm target seam pitch | |
| Arm panels | Padded engineered-wood arm panels wrapped in matching velvet | |
| Surface finish on metal | Powder-coated or plated bronze-gold finish |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Fixed single-person lounge chair with enveloping wingback support | |
|---|---|---|
| Back posture | Raked fixed back with side wings for shoulder enclosure | |
| Arm support | Integrated curved arms at 572 mm floor height, continuous with upholstered body | |
| Channel-tufted surface | Vertical stitched channels stabilize padding and create six visible back pleats | |
| Leg installation | Four removable screw-on tapered legs with polymer floor glides | |
| Mobility | Static placement only; no casters, swivel, rocker, or recline mechanism | |
| Floor protection | Four polymer glides distribute load and reduce marking on hard floors | |
| Compressed delivery recovery | Upholstery and padding may require plumping after unpacking | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living-room reading corner | Provides enclosed back support beside a side table for reading and relaxed seating | |
|---|---|---|
| Bedroom dressing area | Works as a soft single seat near a vanity or wardrobe zone | |
| Hotel guest room | Adds one-person lounge seating in rooms or suites with a compact 770 mm footprint | |
| Boutique reception waiting area | Suitable for low-traffic guest seating where visual accent is prioritized | |
| Study or home office | Pairs with a small side table for breaks rather than task work at a desk | |
| Pairing recommendation | Place with a 550 mm side table to keep drinks level with the arm | |
| Floor surface | Use on low-pile carpet, rugs, hardwood, or tile with polymer glides | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 12520 domestic seating safety | Use strength, stability, and safety requirements for household seating | |
|---|---|---|
| EN 1022 seating stability | Evaluate forward, sideways, and rearward stability of the four-legged chair | |
| EN 16139 non-domestic seating | Apply only if purchased for light contract lounge environments |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4 lounge seating | Use static and dynamic load references for commercial lounge seating validation | |
|---|---|---|
| ANSI/BIFMA X5.1 general-purpose chairs | Use selected seat, back, and leg-strength tests if contract-grade upgrading is required |
Standards applicable to China-market projects
| GB/T 10357.2 furniture mechanical test | Applicable standards and test results require confirmation | |
|---|---|---|
| GB/T 10357.3 furniture durability test | Use seat and back fatigue test methods for repeated domestic lounge loading | |
| GB 18580 interior decoration material | Require formaldehyde emission control for engineered-wood frame components | |
| GB/T 28202 furniture hardware requirements | Use as a reference for screws, leg inserts, and connecting hardware |
This product must meet the following technical requirements: 1. GB/T 10357.2 furniture mechanical test: Applicable standards and test results require confirmation; 2. GB/T 10357.3 furniture durability test: Use seat and back fatigue test methods for repeated domestic lounge loading; 3. GB 18580 interior decoration material: Require formaldehyde emission control for engineered-wood frame components; 4. GB/T 28202 furniture hardware requirements: Use as a reference for screws, leg inserts, and connecting hardware; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
