| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall chair dimensions | 950 x 900 x 820 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 150 kg | |
|---|---|---|
| Chair net weight | 28 kg | |
| Seating capacity | 1 adult | |
| Seat foam thickness | 180 mm | |
| Back foam thickness | 160 mm | |
| Foam density target | 35 kg/m3 | |
| Foam resilience target | 40 percent | |
| Fabric abrasion acceptance target | 30,000 Martindale cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Stretch woven velour or corded textile with alternating terracotta and cream stripes | |
|---|---|---|
| Face fabric weight | 320 g/m2 | |
| Seat cushion core | High-resilience polyurethane foam, 180 mm thick | |
| Back cushion core | Molded polyurethane foam, 160 mm thick | |
| Internal support shell | 15 mm bent plywood or shaped composite board | |
| Base structure | Concealed low-profile support frame with floor glides | |
| Floor contact pads | Non-marking polymer glides, 4 contact points | |
| Ottoman upholstery | Matching striped ribbed textile over foam and rigid inner core | |
| Seam construction | Sewn segmented channels with 8 stitches per 20 mm seam pitch | |
| Fabric treatment | Factory-applied softening finish, no visible leather or vinyl surface | |
| Colorway | Two-tone terracotta brown and warm cream striped upholstery | |
| Frame corrosion protection | Powder-coated steel insert if metal reinforcement is used |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Lounge posture | Fixed 115-degree reclined posture with a deep seat trough and wraparound shoulder support | |
|---|---|---|
| Integrated side support | Armless design with soft 500 mm side bolsters that contain the sitter without hard armrests | |
| Matching ottoman use | Separate 650 mm-wide footrest supports leg elevation and can be repositioned independently | |
| Seat access | Low 380 mm seat and open front allow front-facing entry into the enveloping back shell | |
| Mobility | Lightweight glide-mounted placement without casters or a swivel mechanism | |
| Cleaning access | Fixed upholstery with sewn channels requires vacuuming and spot cleaning rather than cover removal | |
| Floor protection | Four concealed low-friction glides reduce floor marking while limiting sliding on hard surfaces | |
| Coordination design | Chair and ottoman use the same rib pitch, stripe color, and rounded organic silhouette | |
| Load path | Body load transfers through the seat foam, molded shell, and concealed perimeter base to the floor | |
| Placement flexibility | Freestanding two-piece set can face a room, window, or coffee table without wall mounting | |
| Backrest recline angle | 115 degrees | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Assembly time | 20 minutes | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room reading corner | Place the chair and ottoman on a rug for a single-user reading, phone, or relaxation position | |
|---|---|---|
| Bedroom relaxation zone | Use near a window or dressing area where soft seating and leg elevation are preferred | |
| Hotel guest room | Specify for suites and lounges seeking an organic decorative accent with one-person comfort | |
| Boutique lounge waiting area | Group individual sets in spaced clusters to preserve personal comfort zones | |
| Office wellness or quiet room | Use for short breaks away from task seating in a low-traffic relaxation area | |
| Photography or showroom display | Pair with neutral walls and minimalist decor to emphasize the ribbed terracotta silhouette | |
| Recommended clearance | Maintain 300 mm front clearance and 200 mm rear clearance for access and ottoman movement | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
