| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 760 x 780 x 790 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 14 kg | |
|---|---|---|
| Recommended occupant load | 130 kg | |
| Seat static proof load | 180 kg | |
| Backrest static pull test target | 90 kg | |
| Arm downward static load target | 70 kg per arm | |
| Seating capacity | 1 person | |
| Foam indentation hardness | 38 kg/m3 compression grade 45 N | |
| Seat foam density | 38 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Fabric abrasion acceptance | 30,000 Martindale cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Upholstery fabric | Black-and-white houndstooth woven fabric with a polyester-blend visual texture | |
|---|---|---|
| Seat cushion | Padded polyurethane core wrapped in houndstooth upholstery | |
| Backrest panel | Padded upholstered panel attached to the perimeter steel support frame | |
| Arm pads | Houndstooth-covered padded rails over the horizontal frame tubes | |
| Structural frame | Black round tubular steel frame forming arm rails, front supports and rear supports | |
| Leg finish | Black matte powder coating on exposed steel tubing | |
| Internal support panel | 12 mm engineered-wood or equivalent seat support board | |
| Back reinforcement | 20 mm steel tube or shaped steel rail concealed inside the upholstered back | |
| Feet | Non-marking polymer or rubber caps at the four floor contact points | |
| Joining hardware | Welded steel joints with bolted upholstered body mounting points | |
| Seam construction | Tailored edge seams at cushion and back borders | |
| Decorative throw pillow | Separately shown black, white and grey geometric-pattern cushion |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating posture | Fixed lounge posture with a 108-degree reclined back and 430 mm seat height | |
|---|---|---|
| Back support | Continuous padded back panel supports the thoracic and lumbar area without tilt adjustment | |
| Arm support | Two continuous padded armrests at 610 mm floor height support forearm resting | |
| Frame stability | Four outward-splayed tubular legs provide a 650 mm front footprint and fixed floor support | |
| Floor protection | Four polymer or rubber end caps reduce scratching on hard floors | |
| Cushion retention | Fixed upholstered seat and back construction, with no removable cushion mechanism visible | |
| Cleaning access | Smooth woven exterior and open under-seat space allow surface vacuuming and spot cleaning | |
| Mobility | Non-swivel, non-reclining, stationary chair without casters | |
| Assembly form | Tool-based leg or frame attachment with bolted frame joints anticipated | |
| Backrest recline angle | 108 degrees | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Inner protection | Polybag, four-edge EPE foam and double-wall corrugated carton | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room reading corner | Single lounge posture and padded arms suit relaxed reading beside a window | |
|---|---|---|
| Bedroom dressing or relaxation area | Compact 760 mm width fits a bedroom corner without requiring a reclining mechanism | |
| Hotel guest room | Houndstooth upholstery provides a decorative accent chair beside a desk or window | |
| Apartment lounge | One-person seating works in small apartments and open-plan living spaces | |
| Reception waiting area | Suitable for low-density hospitality waiting zones with 130 kg occupant-load acceptance target | |
| Boutique cafe seating | Padded arms and wipeable woven exterior work in style-focused cafe corners | |
| Studio or showroom display | High-contrast pattern creates a feature piece for furniture displays and photo sets | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
