| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 760 W x 750 D x 800 H mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight | 120 kg static seated load | |
|---|---|---|
| net weight | 22 kg | |
| Seating capacity | 1 adult | |
| Backrest lateral support width | 600 mm | |
| Daily-use durability target | 50,000 seat-loading cycles | |
| Foam compression set acceptance | 8 percent maximum after 72 hours | |
| Frame static proof load | 480 kg applied to seat center | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Teal woven velvet-look polyester fabric | |
|---|---|---|
| Seat cushion | High-resilience polyurethane foam, 160 mm thick | |
| Back cushion | Upholstered polyurethane foam panel over rigid backing | |
| Armrest construction | Timber or engineered-wood inner frame covered in foam and fabric | |
| Support legs | Upholstered block legs integrated with arm frame | |
| Internal frame | Kiln-dried timber or engineered wood frame, 30 mm nominal members | |
| Seat support platform | 12 mm plywood or equivalent structural board with webbing | |
| Underlining | Black non-woven dust cover under seat base | |
| Fastening hardware | Staples, screws, and corner blocks at structural joints | |
| Surface seams | Tailored edge seams around arms, back, and seat front | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed lounge posture | Upright 100-degree back angle with 430 mm seat height | |
|---|---|---|
| Integrated arm support | Both arms form continuous padded rails at 610 mm floor height | |
| Side cut-out clearance | Each arm includes a 260 x 140 mm open rectangular aperture | |
| Stationary use | Four integrated block supports provide floor contact without casters | |
| Single-unit seating | One continuous seat and back provide a compact 760 mm-wide lounge position | |
| Floor protection | Hidden glides should be fitted under each upholstered support | |
| Fixed cushion design | Seat and back appear upholstered as continuous tailored components | |
| Maintenance access | Fabric surface requires vacuuming and spot cleaning | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| 40HQ loading | 130 cartons | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Lounge and reception areas | Use in hotel lobbies, club rooms, or office waiting zones | |
|---|---|---|
| Residential living room | Place beside a sofa or as an accent reading chair | |
| Bedroom dressing corner | Pair with a side table for relaxed seating | |
| Retail and showroom display | Use in boutiques or experience centers | |
| Senior-care or guest seating | Specify stable non-swivel seating with padded arms | |
| Collaboration breakout spaces | Arrange two chairs with a low coffee table | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
