| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 760 x 720 x 720 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Net weight | 24 kg | |
|---|---|---|
| Recommended user weight | 130 kg | |
| Static seat verification load | 260 kg | |
| Backrest cyclic durability target | 100000 cycles | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Foam rebound | 40% | |
| Seating capacity | 1 adult | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Teal velvet with woven pile face; actual fiber composition and rub rating require supplier BOM confirmation | |
|---|---|---|
| Seat cushion | Polyurethane foam pad, 120 mm thick, wrapped in soft polyester fiber | |
| Back cushion | Fiber-filled loose cushion over an upholstered curved back, 330 mm high | |
| Inner load frame | Welded steel tube frame with 25 x 25 x 1.5 mm sections | |
| Arm structure | Two U-shaped brass-finished stainless steel or plated steel supports, 40 x 10 mm section | |
| Swivel base | Continuous circular brass-finished metal ring with concealed central bearing plate | |
| Back and side shell | Curved plywood or molded composite panel with padded foam and velvet covering | |
| Underside protection | Black non-marking fabric or felt glide layer around the rotating base perimeter | |
| Sewing detail | Single-needle stitched seam at cushion and side-panel junctions, 8 stitches per 50 mm | |
| Metal finish | Brushed warm-gold PVD or electroplated finish, 0.8 mm minimum visible metal face | |
| Floor-contact system | Concealed swivel bearing with no exposed casters | |
| Colorway | One visible teal upholstery color with champagne-gold metal finish |
Adjustment / rotation / tilt / mobility / storage features
| Swivel function | 360-degree rotation on a concealed central bearing and circular support ring | |
|---|---|---|
| Arm support | Fixed double-bar U-frame on each side provides forearm support at 620 mm floor height | |
| Back support | Enclosed barrel-back wraps around the seat and holds one matching loose cushion | |
| Recline posture | Fixed relaxed lounge angle of 100 degrees from seat plane | |
| Mobility | Non-caster design; chair rotates in place and must be lifted for relocation | |
| Assembly method | Seat body locates onto the swivel base using bolts or a central locking hub | |
| Cleaning access | Removable loose back cushion allows separate vacuuming and fabric maintenance | |
| Floor protection | Full metal ring distributes load and should use felt or polymer glides to protect hard flooring | |
| Nesting compatibility | Non-stackable single chair with a 680 mm circular footprint for grouped seating layouts | |
| Orientation change | User can rotate the seat without moving the brass base ring | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
| Packaged gross weight | 29 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Hotel lobby seating | Use as an accent chair in pairs beside low tables for short meetings and guest waiting | |
|---|---|---|
| Residential living room | Place in a reading corner or beside a window with a matching side table | |
| Executive lounge | Group two to four chairs around a coffee table for informal conversation | |
| Beauty or club waiting area | Position near mirrors or retail displays where customers turn easily without moving the chair | |
| Bedroom dressing zone | Use as a plush vanity-side seat for residential or hospitality suites | |
| Showroom display | Specify with the adjacent brass conical side table to present a coordinated material set | |
| Office breakout area | Deploy in quiet touchdown or social zones with occasional-use upholstered seating | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 16139 | Non-domestic seating strength, durability and safety reference for lounge areas with moderate public use. | |
|---|---|---|
| EN 1022 | Chair stability test reference for forward, rearward and lateral overturning assessment. | |
| EN 13501-1 | Reaction-to-fire classification reference only if flame-retardant fabric is ordered. |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4 | Lounge and public seating strength, durability and structural inspection reference. | |
|---|---|---|
| ANSI/BIFMA X5.1 | General-purpose chair test reference for static load, leg strength and durability where applicable. |
Standards applicable to China-market projects
| GB/T 10357.2 | Furniture mechanical surface test applicability for chair durability and stability procurement verification. | |
|---|---|---|
| GB/T 10357.3 | Chair strength and durability test applicability for back, seat and arm loading acceptance. | |
| GB 18584 | Indoor decorative materials furniture limit for formaldehyde emission review of composite panels. | |
| GB/T 2828.1 | Sampling procedure for incoming batch inspection of upholstery, finish and dimensional quality. |
This product must meet the following technical requirements: 1. GB/T 10357.2: Furniture mechanical surface test applicability for chair durability and stability procurement verification.; 2. GB/T 10357.3: Chair strength and durability test applicability for back, seat and arm loading acceptance.; 3. GB 18584: Indoor decorative materials furniture limit for formaldehyde emission review of composite panels.; 4. GB/T 2828.1: Sampling procedure for incoming batch inspection of upholstery, finish and dimensional quality.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
