| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall footprint | 740 x 720 x 800 mm | |
|---|---|---|
| Seat width | 600 mm | |
| Seat depth | 600 mm | |
| Seat height above floor | 480 mm | |
| Back height above seat | 420 mm | |
| Arm height above seat | 130 mm | |
| Cushion thickness | 160 mm | |
| Outer shell bottom rail height | 20 mm | |
| Back opening width | 520 mm | |
| Floor protection footprint | 700 x 680 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Recommended user weight capacity | 136 kg | |
|---|---|---|
| Net product weight | 21.4 kg | |
| Seat support static load target | 180 kg | |
| Pocket-spring seat system | 24 springs | |
| Foam density | 35 kg/m3 | |
| Foam resilience | 40% | |
| Fabric abrasion acceptance | 30000 double rubs | |
| Single-person occupancy | 1 person | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Polyester velvet with short pile and mustard finish | |
|---|---|---|
| Seat cushion | 160 mm foam core over pocket-spring support | |
| Back padding | 100 mm curved foam layer bonded to formed shell | |
| Inner structural frame | Solid hardwood and plywood composite frame, 18 mm nominal panel | |
| Base platform | Upholstered wood-composite plinth with concealed floor glides | |
| Edge piping | Self-fabric piped cord around cushion and shell openings | |
| Arm and back shell | One-piece curved upholstered barrel shell with integrated armrests | |
| Seat suspension | Elastic webbing or pocketed coil deck under foam cushion | |
| Sewn construction | Tailored panel seams with 80 mm stitch spacing acceptance target | |
| Floor contact | Non-marking polymer glides at platform underside | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Seating posture | Semi-deep lounge posture with 480 mm seat height and enveloping back support | |
|---|---|---|
| Back enclosure | Continuous curved back and arms wrap around the sitter for lateral support | |
| Rotation | Fixed non-swivel platform base with no exposed rotating mechanism | |
| Recline function | Fixed back angle with no reclining mechanism or tilt lock | |
| Cushion retention | Tailored seat cushion sits within the curved shell with piped edge alignment | |
| Floor protection | Concealed glides allow repositioning while reducing floor marking | |
| Entry and exit | Low integrated arms and open front permit side-and-front access | |
| Cleaning access | Upholstered fixed cover suitable for vacuuming and solvent spot cleaning | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Living room accent seating | Place beside a sofa or coffee table for one-person reading and conversation | |
|---|---|---|
| Bedroom corner chair | Use in a bedroom corner with a side table for relaxed seating | |
| Reception lounge | Suitable for boutique waiting areas in pairs with low occasional tables | |
| Hotel guest room | Use as an upholstered lounge seat near a window or desk area | |
| Balcony or sunroom interior | Use in enclosed sunrooms with controlled moisture exposure | |
| Small apartment living | 740 mm footprint provides lounge seating without a separate sofa or leg assembly | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
