| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 920 x 880 x 780 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 34 kg | |
|---|---|---|
| Recommended user weight | 140 kg | |
| Static seat verification load | 280 kg | |
| Seating capacity | 1 adult | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Foam indentation comfort target | Seat 65 N and back 45 N at 40 percent compression | |
| Fabric abrasion acceptance target | 30,000 Martindale cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Wide-wale polyester corduroy in caramel brown with vertical ribbed pile | |
|---|---|---|
| Seat cushioning | High-resilience polyurethane foam with a soft polyester fibre wrap | |
| Back cushioning | Polyurethane foam with fibre batting following the curved upholstered shell | |
| Internal load frame | Kiln-dried timber and engineered-wood composite framing, 30 mm nominal member size | |
| Arm internal support | Shaped timber or moulded composite arm former enclosed in foam | |
| Base structure | Integrated floor-contacting upholstered base without separate metal feet | |
| Seat support deck | Elastic webbing, 80 mm width at 120 mm spacing, over the timber frame | |
| Upholstery closure | Tailored sewn cover with reinforced corner seams and concealed underside closure | |
| Seam construction | Stitched seam allowance with 8 stitches per 100 mm target | |
| Floor protection | Dark non-marking fabric or felt glides integrated under the upholstered base | |
| Frame joining hardware | Screwed and glued corner blocks with 4 mm steel reinforcing brackets at high-stress joints | |
| Fabric treatment | Undyed visual finish in caramel tone; optional stain-resistant treatment available for procurement |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating posture | Upright relaxed lounge posture with a 420 mm seat height and 600 mm seat depth | |
|---|---|---|
| Arm support | Integrated padded arms provide continuous forearm and side support at 600 mm floor height | |
| Back support | Continuous padded back wraps around the sides and supports the lumbar and mid-back region | |
| Mobility | Stationary floor-placed chair with no swivel mechanism, tilt mechanism, casters or exposed legs | |
| Upholstery maintenance | Fixed upholstered cover with accessible underside seams; vacuum corduroy pile and spot-clean fabric | |
| Floor-saving design | Low broad contact base distributes weight and requires protective glides on hard floors | |
| Arrangement use | Freestanding one-person chair can be paired or placed facing a coffee table | |
| Structural stability | Low centre of gravity with front floor body and rear support leg limiting lateral rocking | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Gross weight | 42 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room | Place beside a sofa or coffee table as a sculptural reading and conversation seat | |
|---|---|---|
| Hotel lounge | Use in pairs in hotel lobbies or guest floors where a warm, soft accent chair is required | |
| Reception area | Specify for boutique offices and waiting zones needing one-person soft seating with strong visual character | |
| Bedroom dressing corner | Position near a window or wardrobe for relaxed seating and dressing | |
| Cafe lounge zone | Use in low-turnout cafe corners with upholstery maintenance and stain treatment specified | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Seating mechanical safety recommendation | EN 16139 for strength, durability and safety of non-domestic lounge seating | |
|---|---|---|
| Upholstered furniture flammability recommendation | EN 1021for cigarette ignition resistance of upholstery composites |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| Furniture safety recommendation | Recommended references: GB/T 10357.2 | |
|---|---|---|
| Chair leg and front stability recommendation | GB/T 10357.2 applicable to static loading of seating structural components |
This product must meet the following technical requirements: 1. Furniture safety recommendation: Recommended references: GB/T 10357.2; 2. Chair leg and front stability recommendation: GB/T 10357.2 applicable to static loading of seating structural components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
