| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall chair dimensions | 770 x 1070 x 1160 mm | |
|---|---|---|
| Overall ottoman dimensions | 550 x 490 x 500 mm | |
| Seat width | 560 mm | |
| Seat depth | 540 mm | |
| Seat height | 445 mm | |
| Backrest height | 760 mm | |
| Headrest cushion size | 560 x 210 x 130 mm | |
| Armrest height above seat | 210 mm | |
| Armrest width | 80 mm | |
| Ottoman cushion size | 550 x 490 x 120 mm | |
| Floor-to-base clearance | 120 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight | 150 kg | |
|---|---|---|
| Chair net weight | 26 kg | |
| Seat static load reference | 180 kg | |
| Ottoman static load reference | 80 kg | |
| Back recline angle | 145 degrees | |
| Swivel travel | 360 degrees | |
| Upholstery abrasion acceptance target | 30,000 cycles | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 25 kg/m3 | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Burgundy smooth upholstery, leather or PU construction | |
|---|---|---|
| Back and headrest upholstery | Matching burgundy upholstery over segmented padded cushions | |
| Seat cushion core | High-resilience polyurethane foam, 120 mm thick pad depth | |
| Back cushion core | Layered polyurethane foam and soft fiber fill, 100 mm thick | |
| Internal load frame | Hardwood or engineered-wood seat frame with 25 mm structural members | |
| Reclining support frame | 1.5 mm steel recliner bracket with pivot hinges | |
| Chair pedestal base | Black powder-coated steel four-spoke base, 2.0 mm wall section | |
| Ottoman pedestal base | Matching black powder-coated steel four-spoke swivel base | |
| Swivel bearing | Steel radial bearing with nylon wear sleeve at central column | |
| Arm construction | Padded upholstered arm over shaped wood or composite arm shell | |
| Base floor contacts | Black non-marking polymer pads on each spoke tip | |
| Seam construction | Stitched perimeter seams with 70 mm seam pitch target |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Manual recline operation | Body-pressure recline through a side or concealed latch to a 145 degree back angle | |
|---|---|---|
| Swivel operation | 360 degree rotation on a fixed-height central bearing without gas lift | |
| Head and neck support | Integrated padded headrest with 210 mm vertical cushion height | |
| Lumbar and back support | Three vertically segmented padded back zones follow the reclined spine angle | |
| Leg rest use | Separate ottoman supports the lower legs independently of the chair recline mechanism | |
| Arm support | Fixed continuous padded arms provide 210 mm support above the seat | |
| Mobility limitation | Swivels on glide bases but has no casters and is not designed for frequent room rolling | |
| Floor protection | Four flat polymer contact pads spread load and reduce hard-floor marking | |
| Return and stability | Low four-spoke pedestal resists tipping during reclined posture and exit movements | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room reading corner | Pairs with a rug and round side table for reading, tea placement and relaxed conversation | |
|---|---|---|
| Bedroom relaxation area | Suitable beside a bed or window for reclined rest without using the bed | |
| Hotel lounge or guest suite | Provides a residential-style single seat for short rest and guest comfort | |
| Executive quiet room | Fits informal relaxation or recovery spaces rather than task-oriented work seating | |
| Apartment living room | Burgundy finish acts as an accent chair in neutral or dark interiors | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
