| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall chair dimensions | 720 x 760 x 790 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Chair net weight | 18 kg | |
|---|---|---|
| Recommended user weight | 130 kg | |
| Ottoman top load | 80 kg | |
| Seating capacity | 1 person | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Foam compression set acceptance | 8 percent after 22 hours at 70 degrees C | |
| Fabric abrasion acceptance | 30,000 Martindale cycles | |
| Frame cyclic loading acceptance | 100,000 seat-back cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Chair upholstery | Black-and-white houndstooth woven fabric over padded seat and back | |
|---|---|---|
| Ottoman upholstery | Matching black-and-white houndstooth woven fabric with wrapped cushion edges | |
| Seat cushion | High-resilience polyurethane foam with fabric-tailored cover | |
| Backrest cushion | Padded polyurethane panel with horizontal seam and fabric-covered face | |
| Arm pads | Smooth dark brown wood or wood-composite pads with rounded ends | |
| Arm supports | Vertical gold-toned metal stems linked to black side frames | |
| Chair frame and legs | Black powder-coated steel tube with sled-style side rails and four floor contacts | |
| Ottoman legs | Four black powder-coated metal legs, slightly splayed at the corners | |
| Internal support board | 12 mm engineered-wood load board under the seat cushion | |
| Floor contact pads | Injection-molded polyethylene or nylon glides with felt option | |
| Seam construction | Tailored fabric seams with 8 stitches per 25 mm target | |
| Surface finish on metal | Matte black powder coating over steel tube |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating posture | Upright relaxed lounge posture with 100-degree seat-to-back angle | |
|---|---|---|
| Footrest function | Separate ottoman supports leg elevation and can be repositioned independently | |
| Arm support | Fixed padded arms provide 190 mm elbow support without height or swing adjustment | |
| Back support | Continuous padded backrest with a horizontal seam divides shoulder and lumbar zones | |
| Frame stability | Sled-style side rails tie front and rear legs to resist lateral rocking | |
| Floor protection | Four chair glides and four ottoman glides isolate metal from wood or tile flooring | |
| Mobility | Lightweight chair and unfastened ottoman allow two-person repositioning; no casters are fitted | |
| Upholstery maintenance | Removable or sewn fabric cover should be specified before order; visible tailoring allows seam-level cleaning access | |
| Color and upholstery option | One visible houndstooth finish; procurement should request fabric SKU and color batch control | |
| Use limitation | Designed for dry indoor lounge areas, not for outdoor exposure or wet commercial environments | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room reading corner | Place with the ottoman beside a sofa for reading, conversation or media relaxation | |
|---|---|---|
| Bedroom dressing or relaxation area | Use near a window or wardrobe as a lightweight seating and footrest pair | |
| Hotel guest room | Specify for boutique rooms requiring mid-century styling and independent foot support | |
| Executive lounge or reception breakout | Use in low-density breakout areas with fabric abrasion and frame-cycle validation | |
| Studio apartment seating | The separate ottoman provides leg support without the footprint of a chaise sofa | |
| Pairing with round side table | Position one side table within 300 mm of the arm for drinks, books or task lighting | |
| Floor compatibility | Recommended over rugs, engineered wood, tile or hardwood with non-marking glides | |
| Interior style | Black-and-white pattern, warm wood pads and black metal suit mid-century modern and contemporary rooms |
EU Market Access Requirements* EN Standards
| Seating strength recommendation | EN 16139 applies to strength, durability and safety requirements for non-domestic seating | |
|---|---|---|
| Domestic furniture safety recommendation | EN 12521 applies to strength and durability for domestic seating | |
| Upholstered furniture flammability recommendation | EN 1021applies to cigarette ignition resistance of upholstered seating | |
| Surface coating recommendation | EN 16121 applies if non-domestic-grade coated metal surfaces require durability verification |
US and Canada office-furniture standards
| Lounge seating structural recommendation | ANSI/BIFMA X5.4 applies to lounge seating strength, stability and durability tests | |
|---|---|---|
| Static load test recommendation | ANSI/BIFMA X5.4 static load procedures can verify the 130 kg user-weight target | |
| Durability test recommendation | ANSI/BIFMA X5.4 cyclic seat and back tests support a 100,000-cycle validation target | |
| Stability recommendation | ANSI/BIFMA X5.4 forward and rear stability procedures are relevant to the sled-frame chair |
Standards applicable to China-market projects
| Furniture safety recommendation | GB/T 10357.2 applies to furniture mechanical property tests for chairs and stools | |
|---|---|---|
| Upholstered furniture durability recommendation | GB/T 28202 applies to general quality requirements for upholstered furniture | |
| Foam safety recommendation | GB/T 10802 applies to flexible polyurethane foam for general furniture use | |
| Wood-composite emission recommendation | GB 18580 applies to formaldehyde emission limits for engineered-wood components | |
| Textile safety recommendation | GB 18401 applies to safety technical requirements for textile products |
This product must meet the following technical requirements: 1. Furniture safety recommendation: GB/T 10357.2 applies to furniture mechanical property tests for chairs and stools; 2. Upholstered furniture durability recommendation: GB/T 28202 applies to general quality requirements for upholstered furniture; 3. Foam safety recommendation: GB/T 10802 applies to flexible polyurethane foam for general furniture use; 4. Wood-composite emission recommendation: GB 18580 applies to formaldehyde emission limits for engineered-wood components; 5. Textile safety recommendation: GB 18401 applies to safety technical requirements for textile products; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
