| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 22 kg | |
|---|---|---|
| Recommended user weight capacity | 140 kg | |
| Seat cushion foam thickness | 120 mm | |
| Back and arm foam thickness | 80 mm | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Foam rebound rating | 35% | |
| Suggested occupancy | 1 adult | |
| Static seat proof-load target | 280 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Ivory woven boucle textile with a raised looped surface | |
|---|---|---|
| Seat cushion | High-resilience polyurethane foam with soft top layer | |
| Back and arm padding | Molded polyurethane foam wrapped around the curved shell | |
| Internal load frame | Kiln-dried hardwood and plywood composite frame | |
| Base support structure | Concealed low-profile wooden perimeter frame with anti-slip pads | |
| Upholstery attachment | Tailored sewn fabric cover with vertical inside-back seam alignment | |
| Front arm edges | Fully upholstered rounded edges without exposed hard trim | |
| Floor contact | Fabric-covered bottom plinth with hidden protective glides | |
| Fabric surface mass target | 380 g/m2 | |
| Fabric abrasion acceptance target | 30,000 Martindale cycles | |
| Seam construction target | 7 stitches per 50 mm | |
| Color option count | 1 ivory color shown |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating posture | Upright relaxed lounge posture with a 420 mm seat height | |
|---|---|---|
| Back enclosure | Continuous wraparound barrel back provides lateral shoulder and upper-arm support | |
| Arm support | Integrated left and right arm rolls connect the seat apron to the back | |
| Base movement | Fixed stationary seating with no visible casters, swivel plate, or rocking base | |
| Access opening | 560 mm front opening allows direct front-facing entry between the arms | |
| Cushion design | Sewn-in tailored cushion appearance with a continuous upholstered seat platform | |
| Floor protection | Hidden glides or pads are required under the fabric-covered plinth | |
| Cleaning access | Non-reclining compact form allows repositioning by lifting; no folding or nesting function | |
| Pairing configuration | Can be specified singly or in symmetrical pairs for conversation areas | |
| Maximum body envelope | Fits a 140 kg adult within a 560 mm inner seat opening | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Carton dimensions | 920 x 880 x 800 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Hotel lobby seating | Use in pairs or small clusters for compact guest seating and conversation zones | |
|---|---|---|
| Office lounge area | Place in breakout, waiting, or collaboration zones for short informal meetings | |
| Residential living room | Suitable as an accent chair beside a sofa or in a reading corner | |
| Reception waiting space | Specify alongside low tables where visitors need arm and back support | |
| Bedroom dressing zone | Position near a vanity or wardrobe for relaxed seated use | |
| Retail showroom display | Use as a curated display seat in fashion, beauty, or design showrooms | |
| Senior-friendly seating area | The 420 mm seat height and integrated arms assist standing transitions | |
| Cafe lounge corner | Deploy in upscale cafes or member lounges for low-turn, comfortable seating |
EU Market Access Requirements* EN Standards
| Contract seating safety basis | EN 16139 | |
|---|---|---|
| Upholstered furniture flammability basis | EN 1021and EN 1021 |
US and Canada office-furniture standards
| Lounge seating structural basis | ANSI/BIFMA X5.4 | |
|---|---|---|
| Chair stability verification | ANSI/BIFMA X5.4 stability clauses | |
| Seating durability verification | ANSI/BIFMA X5.4 static and fatigue load tests |
Standards applicable to China-market projects
| Furniture strength test basis | GB/T 10357.2 | |
|---|---|---|
| Furniture durability test basis | GB/T 10357.3 | |
| Upholstered furniture labeling | GB/T 31952 | |
| Fabric colorfastness basis | GB/T 3920 |
This product must meet the following technical requirements: 1. Furniture strength test basis: GB/T 10357.2; 2. Furniture durability test basis: GB/T 10357.3; 3. Upholstered furniture labeling: GB/T 31952; 4. Fabric colorfastness basis: GB/T 3920; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
