| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| overall dimensions | 850 x 920 x 900 mm | |
|---|---|---|
| seat width | 680 mm | |
| seat depth | 620 mm | |
| seat height | 380 mm | |
| backrest height above seat | 520 mm | |
| seat lip thickness | 140 mm | |
| middle layer exposed band thickness | 90 mm | |
| base layer thickness | 180 mm | |
| under-shell arch clearance | 120 mm | |
| floor contact length | 760 mm | |
| side containment height | 160 mm | |
| upholstered shell turning radius | 110 mm | |
| single-user floor footprint | 0.78 m2 | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| net weight | 18 kg | |
|---|---|---|
| recommended static user load | 136 kg | |
| seat foam compression resistance | 35 kg/m3 polyurethane foam | |
| back foam compression resistance | 30 kg/m3 polyurethane foam | |
| seat padding thickness | 120 mm | |
| back padding thickness | 100 mm | |
| upholstery fabric weight | 380 g/m2 | |
| fabric abrasion acceptance target | 50,000 Martindale cycles | |
| seam tensile acceptance target | 300 N per seam | |
| occupant capacity | 1 person |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| yellow seat and back upholstery | Fine woven textile with tight upholstery over curved foam | |
|---|---|---|
| off-white middle padded layer | Contrasting woven textile over shaped foam band | |
| orange floor-contact layer | Durable woven textile upholstery over load-bearing padded base | |
| seat cushioning | 120 mm polyurethane foam with integrated contouring | |
| back cushioning | 100 mm layered polyurethane foam following the inclined back | |
| hidden structural shell | 18 mm molded plywood or equivalent curved composite panel | |
| internal reinforcing frame | 25 mm tubular steel or bent hardwood support frame | |
| underside protective layer | Non-marking fabric or felt glide pads at floor-contact zones | |
| upholstery seam construction | Tailored stitched seams following the organic seat transition | |
| edge build-up | Foam-wrapped rounded edge with no exposed hard frame | |
| base contact structure | Continuous rocker-like floor shell with two broad contact lobes | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| seating posture | Fixed relaxed lounge posture with a 118-degree inclined back and low 380 mm seat | |
|---|---|---|
| body containment | Raised 160 mm side and front lip cradles the thighs and lower back | |
| rocking behavior | Arched floor profile allows gentle fore-aft rocking over a 7-degree arc | |
| swivel function | No swivel function; the upholstered shell remains aligned with its floor-contact base | |
| height adjustment | No height adjustment; seat height is fixed at 380 mm | |
| back recline adjustment | No mechanical recline; back support is fixed at 118 degrees from horizontal | |
| arm support | Integrated raised side edges provide partial arm support without separate armrests | |
| mobility | Stationary floor-contact chair with no casters or removable legs | |
| cleaning access | Lightweight 18 kg one-piece chair can be repositioned for floor and underside cleaning | |
| upholstery removal | Fixed tailored upholstery without visible removable cushion covers | |
| backrest recline angle | 118 degrees from horizontal | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| design-led lounge area | Use in hotel lobbies or showrooms where the three-tone wave form acts as a sculptural single seat. | |
|---|---|---|
| creative office breakout zone | Place one or two units in informal collaboration spaces for short relaxed meetings or individual downtime. | |
| residential living room | Suitable as an accent lounge chair beside a sofa where low, reclined seating is acceptable. | |
| retail display setting | Use in concept stores or exhibition displays because the organic profile creates a strong visual focal point. | |
| art and furniture gallery | Appropriate for curated interiors seeking soft biomorphic forms and high-contrast color blocking. | |
| waiting and relaxation corner | Suitable for low-traffic premium waiting areas where comfort and visual identity outweigh high-density seating. | |
| floor clearance requirement | Position on level hard flooring or low-pile carpet to preserve the curved rocking contact and 120 mm under-shell clearance. | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Strength, durability and safety requirements for non-domestic seating suitable for lounge areas. | |
|---|---|---|
| EN 1021-1:2014 | Ignition source smouldering cigarette upholstered-furniture flammability test for fit-out review. | |
| EN 1021-2:2014 | Ignition source match flame upholstered-furniture flammability test for project specification. |
US and Canada office-furniture standards
| ANSI/BIFMA X5.42-2019 | Vertical lounge seating standard relevant for structural and stability acceptance in commercial interiors. | |
|---|---|---|
| ANSI/BIFMA X5.1-2017 | General office chairs test reference usable only for selected static load and stability checks. | |
| BIFMA E3-2019 | Furniture sustainability and material transparency reference for procurement documentation. |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture applicable to the hidden shell and frame procurement review. | |
|---|---|---|
| GB/T 10357.3-2013 | Chair and stool strength and durability test method suitable for static and fatigue acceptance testing. | |
| GB 18584-2001 | Indoor wooden-furniture limited formaldehyde release relevant if a wood-composite substrate is used. | |
| GB/T 17924-2018 | Upholstered furniture testing guidance relevant to seating performance and structural integrity review. |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture applicable to the hidden shell and frame procurement review.; 2. GB/T 10357.3-2013: Chair and stool strength and durability test method suitable for static and fatigue acceptance testing.; 3. GB 18584-2001: Indoor wooden-furniture limited formaldehyde release relevant if a wood-composite substrate is used.; 4. GB/T 17924-2018: Upholstered furniture testing guidance relevant to seating performance and structural integrity review.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
