| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| overall dimensions | 760 x 760 x 720 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| recommended user weight capacity | 135 kg | |
|---|---|---|
| net weight reference | 22 kg | |
| seating capacity | 1 person | |
| seat foam density | 35 kg/m3 | |
| back foam density | 28 kg/m3 | |
| foam resilience | 35% | |
| fabric abrasion acceptance | 30,000 Martindale cycles | |
| static seat load verification | 150 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| outer upholstery | Light gray woven fabric or leather-look upholstery | |
|---|---|---|
| seat cushion | 120 mm thick polyurethane foam with fiber-topped upholstery | |
| back and arm shell | Curved padded upholstered panel over shaped plywood or composite frame | |
| internal frame | Kiln-dried hardwood or bent plywood support frame, 18 mm target thickness | |
| pedestal base | Upholstered box base with rounded corners and internal wooden support frame | |
| base bottom protection | 4 plastic or felt floor-protector glides, 25 mm target diameter | |
| upholstery seams | Tailored vertical seams with 8 stitches per 100 mm target pitch | |
| seat support board | 8 mm plywood fatigue board or equivalent elastic webbing platform | |
| padding layers | 20 mm soft polyester fiber wrap over shaped foam | |
| frame fasteners | M8 steel corner blocks and confirmat-style connector hardware | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| seating posture | Semi-relaxed upright posture with 100-degree target seat-to-back angle | |
|---|---|---|
| wrap-around support | Continuous back and arm structure surrounds the user on three sides | |
| side access | Open side cutouts allow entry and arm placement while preserving the enclosed back | |
| single-person use | One-person seat suitable for cross-legged or leaned-back sitting | |
| floor placement | Stationary floor-standing design on an upholstered pedestal base | |
| cushion retention | Fixed or recessed seat cushion aligned within the upholstered base | |
| maintenance access | Removable upholstery cover not visually confirmed; surface cleaning access is from all exposed sides | |
| stacking or nesting | Non-stacking, non-nesting chair due to wide enclosed curved shell and fixed base | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| carton count | 1 flat-packed or semi-assembled carton | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| living room accent seating | Suitable beside a sofa, window, or round side table for reading and conversation | |
|---|---|---|
| bedroom vanity or corner chair | Fits a bedroom corner where a single soft seat is needed for dressing or resting | |
| reception lounge area | Suitable for boutique offices, studios, and hotel waiting corners | |
| small apartment living | Recommended for compact rooms where cross-legged seating is desired without a large armchair | |
| cafe or lounge seating | Can be paired with a 450 to 520 mm round side table for casual beverage service | |
| neutral interior schemes | Light gray upholstery coordinates with beige, cream, white, and warm-minimal palettes | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| upholstered furniture safety target | EN 16139 | |
|---|---|---|
| ignitability assessment target | EN 1021and EN 1021 |
US and Canada office-furniture standards
| lounge seating structural target | ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| upholstered furniture safety target | GB/T 28008 | |
|---|---|---|
| foam physical property target | GB/T 10807 | |
| fabric colorfastness target | GB/T 3920 | |
| wood-based panel emission target | GB 18580 |
This product must meet the following technical requirements: 1. upholstered furniture safety target: GB/T 28008; 2. foam physical property target: GB/T 10807; 3. fabric colorfastness target: GB/T 3920; 4. wood-based panel emission target: GB 18580; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
