| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 500 x 400 x 450 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Product net weight | 18 kg | |
|---|---|---|
| Top panel static load capacity | 30 kg | |
| Drawer slide open-close cycle rating | 50000 cycles | |
| Supported number of users | 1 | |
| Maximum recommended top item height | 400 mm | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Cabinet main body | 18mm E0 grade engineered wood with matte warm light gray lacquer finish | |
|---|---|---|
| Top panel | 25mm E0 grade engineered wood with matching matte lacquer, edge-banded | |
| Circular pull handle | Brushed stainless steel, two-tone polished/brushed finish | |
| Drawer box construction | 12mm plywood with smooth matte interior finish | |
| Drawer slides | Full extension cold-rolled steel soft-close slides | |
| Leveling feet | Black nylon non-slip adjustable feet, 10mm height | |
| Base trim | Matching lacquered engineered wood trim | |
| Rear panel | 3mm hardboard dust back panel | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Storage configuration | Two equal-height stacked soft-close drawers for concealed bedside storage | |
|---|---|---|
| Handle operation | Semicircular upper and lower recessed sections form single circular pull to open either drawer | |
| Soft-close feature | Integrated damper slows drawer closing for the final 50mm of travel to prevent slamming | |
| Leveling adjustment | Adjustable feet provide 5mm height adjustment to stabilize cabinet on uneven floors | |
| Surface function | Smooth sealed top surface supports placement of table lamps, reading materials, personal items | |
| Wall anchoring | Pre-drilled rear hole accepts anti-tip strap to secure cabinet to wall for safety | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential bedroom placement | Positioned beside twin, full, or queen size beds as a bedside storage unit | |
|---|---|---|
| Modern living room side table use | Placed next to low-profile sofas as an end table for remotes, drinks, and decor | |
| Minimalist interior design schemes | Suits monochrome, modern minimalist, and contemporary luxury decor palettes | |
| Small space storage solution | Used in compact apartments or guest bedrooms with limited floor space | |
| Hotel guest room furnishing | Specified for boutique hotel rooms for compact bedside storage |
EU Market Access Requirements* EN Standards
| Formaldehyde emission | EN 312:2010 | |
|---|---|---|
| Hardware durability | EN 15338:2007 |
Standards applicable to China-market projects
| Formaldehyde emission | GB 18580 | |
|---|---|---|
| Surface coating safety | GB 18584 | |
| Hardware performance | GB/T 24543 |
This product must meet the following technical requirements: 1. Formaldehyde emission: GB 18580; 2. Surface coating safety: GB 18584; 3. Hardware performance: GB/T 24543; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
