| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 600 x 450 x 650 mm | |
|---|---|---|
| tabletop thickness | 25 mm | |
| storage body height | 260 mm | |
| leg height | 390 mm | |
| leg diameter at floor contact | 25 mm | |
| under-unit floor clearance | 370 mm | |
| drawer front panel height | 240 mm | |
| top inset recess depth | 5 mm | |
| leg splay angle from vertical | 8 degrees | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| product net weight | 22 kg | |
|---|---|---|
| tabletop static load capacity | 50 kg | |
| total enclosed storage volume | 38 L | |
| recommended maximum user weight for top use | 100 kg | |
| surface scratch resistance (wood finish) | Class 2 | |
| drawer slide cycle rating | 30000 cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| storage body frame | 18mm thick MDF core with smoked oak veneer, matte lacquer finish | |
|---|---|---|
| inset tabletop | 25mm thick sintered stone, matte light beige finish | |
| support legs | 25mm diameter solid beech wood, dark ebonized matte finish | |
| drawer slides | Cold-rolled steel 3-section full-extension slides, black powder coat | |
| drawer box construction | 12mm thick plywood with dovetail joinery, anti-tip stop | |
| tabletop edge banding | Matching smoked wood veneer edge, 2mm radius rounded profile | |
| leg mounting plates | 2mm thick galvanized steel, pre-installed to body base | |
| drawer front panels | Matching smoked wood veneer on MDF, flush fit to body | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| drawer operation | Two soft-close full-extension drawers with push-to-open release | |
|---|---|---|
| leg assembly | Four legs thread into pre-installed mounting plates, no tools required | |
| floor protection | Each leg fitted with 5mm thick non-slip felt pad to prevent floor scratching | |
| surface maintenance | Matte finish resists fingerprints and water rings, wipe clean with damp cloth | |
| storage access | Drawers extend 350mm to provide full access to internal storage space | |
| anti-tip stability | Splayed leg configuration creates 620mm wide support base to prevent tipping | |
| load distribution | Reinforced corner blocks at leg attachment points support full rated top load | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| residential bedroom bedside use | Placed adjacent to single or queen size beds for lamp, book and personal item storage | |
|---|---|---|
| sofa side end table use | Positioned next to upholstered sofas in living rooms for drink, remote and accessory placement | |
| modern contemporary interior schemes | Coordinates with minimalist, mid-century modern and Italian-design inspired interiors | |
| small space apartment installation | Compact footprint fits in narrow bedroom gaps or small living room layouts | |
| matched bedroom set configuration | Pairs with platform beds, dressers and wardrobes in dark smoked wood finish |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements, applicable to stability and strength | |
|---|---|---|
| EN 12521:2015 | Furniture - strength, durability and safety for domestic tables, applicable to top load testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional and finish quality | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and finish quality; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
