| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 600 x 420 x 550 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Unit net weight | 32 kg | |
|---|---|---|
| Per drawer static load capacity | 15 kg | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Surface scratch resistance | 2000 abrasion cycles | |
| Recommended maximum user weight for top surface | 50 kg | |
| Total internal storage volume | 78 L | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer case panels | 18mm melamine-faced particleboard, dark woodgrain finish | |
|---|---|---|
| Drawer front panels | 18mm MDF substrate, high-gloss light taupe lacquer finish | |
| Top work surface | 18mm melamine-faced particleboard, matching dark woodgrain finish | |
| Plinth base | 18mm melamine-faced particleboard, dark woodgrain finish | |
| Drawer internal boxes | 12mm melamine-faced MDF, light neutral interior finish | |
| Drawer slides | Full-extension zinc-plated cold-rolled steel, soft-close mechanism | |
| Edge banding | 2mm PVC edge banding, color-matched to adjacent panels | |
| Back panel | 3mm hardboard, dark matte finish | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Top gallery lip | 30mm raised perimeter edge around top surface to prevent items sliding off | |
|---|---|---|
| Drawer operation | Recessed integrated gap handles, no protruding hardware, push-to-open compatible | |
| Drawer extension | Full-extension slides allow 100% drawer access for full interior visibility | |
| Soft-close damping | Integrated hydraulic dampers prevent slamming and pull drawers closed gently | |
| Freestanding installation | Leveling feet on plinth base allow adjustment for uneven floor surfaces | |
| Storage configuration | Two equal-height deep drawers for folded clothing, accessories and bedside essentials | |
| Wall anchoring | Pre-drilled rear anchor points for anti-tip restraint securing unit to wall | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential bedroom use | Positioned beside single or double beds as bedside storage for lamps, books and personal items | |
|---|---|---|
| Apartment living space use | Used as small side storage next to sofas in compact living rooms for media accessories | |
| Hotel guest room use | Installed as matching bedside storage in mid-range hotel guest rooms for guest convenience | |
| Small home office use | Used as under-desk or side storage for stationery and documents in compact home workspaces | |
| Recommended matching furniture | Pairs with two-tone platform beds, dressers and wardrobes from the same product collection |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety requirements for domestic storage furniture, including anti-tip stability requirements | |
|---|---|---|
| EN 312:2010 | Performance requirements for particleboard panels used in furniture load-bearing structures |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to case construction and finish durability | |
|---|---|---|
| GB/T 4893.4-2013 | Surface abrasion resistance test for furniture surfaces, applicable to top and drawer finishes | |
| GB 28007-2011 | Formaldehyde emission limit for wooden furniture components, maximum E1 grade 0.124mg/m3 |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to case construction and finish durability; 2. GB/T 4893.4-2013: Surface abrasion resistance test for furniture surfaces, applicable to top and drawer finishes; 3. GB 28007-2011: Formaldehyde emission limit for wooden furniture components, maximum E1 grade 0.124mg/m3; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
