| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 500 x 400 x 550 mm | |
|---|---|---|
| Glass top thickness | 8 mm | |
| Drawer internal dimensions | 420 x 340 x 120 mm | |
| Drawer front panel height | 120 mm | |
| Open base recess height | 180 mm | |
| Side panel thickness | 25 mm | |
| Beveled glass edge overhang | 10 mm | |
| Lower front panel height | 250 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 15 kg | |
|---|---|---|
| Product net weight | 12 kg | |
| Recommended number of users | 1 | |
| Drawer slide cycle rating | 30000 cycles | |
| Glass surface impact resistance | 50 mm steel ball drop at 200 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 8mm thick clear tempered glass with beveled edges | |
|---|---|---|
| Frame and side panels | Dark matte finish E1 grade engineered wood with 25mm thickness | |
| Drawer front | Reddish-brown wood veneer over engineered wood substrate | |
| Lower front panel | Dark matte engineered wood matching frame finish | |
| Drawer box | 15mm thick E1 grade MDF with smooth interior finish | |
| Drawer slides | Cold-rolled steel side-mounted full-extension slides | |
| Bottom foot pads | Non-slip PE plastic pads to prevent floor scratching | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Handleless push-to-open mechanism with 300mm full extension travel | |
|---|---|---|
| Storage zoning | Upper full-width drawer for small personal items, open lower recess for temporary foot or item placement | |
| Surface function | Flat tempered glass top supports placing table lamps, books, phones and beverage containers | |
| Floor protection | Built-in non-slip foot pads prevent scratches on hard flooring and reduce movement noise | |
| Assembly requirement | Knock-down assembly with pre-drilled components, all hardware included | |
| Edge safety | Beveled and polished glass top edges eliminate sharp corners for residential use | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Secondary placement | Living room end table next to sofas or accent chairs for holding drinks and remote controls | |
|---|---|---|
| Applicable users | Residential users seeking minimalist modern bedroom furniture with contrasting color design | |
| Recommended complementary furniture | Pair with low-profile platform beds, dark finish wardrobes or matching dressers for coordinated bedroom sets | |
| Surface use suitability | Tempered glass top is water and stain resistant, suitable for placing humidifiers, skincare items and drinkware |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and strength requirements for domestic storage furniture including nightstands | |
|---|---|---|
| EN 12150-1:2015 | Thermally toughened soda lime silicate safety glass for furniture use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood frame quality inspection | |
|---|---|---|
| GB 15763.2-2005 | Safety requirements for tempered glass used in furniture table tops | |
| GB 18584-2001 | Limit of formaldehyde emission for indoor wooden furniture, applicable to panel material acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood frame quality inspection; 2. GB 15763.2-2005: Safety requirements for tempered glass used in furniture table tops; 3. GB 18584-2001: Limit of formaldehyde emission for indoor wooden furniture, applicable to panel material acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
