| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 600 x 500 x 630 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total product net weight | 42 kg | |
|---|---|---|
| Per-drawer static load capacity | 15 kg | |
| Rotation mechanism cycle life | 12000 cycles | |
| Drawer slide static load rating | 20 kg | |
| Recommended maximum user weight on top surface | 50 kg | |
| Total internal storage volume | 108 L | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Drawer body core material | 18mm thick MDF core | |
|---|---|---|
| Exterior surface finish | Natural walnut wood veneer, matte clear lacquer topcoat | |
| Drawer pulls (top/bottom tiers) | Matte black powder-coated zinc alloy | |
| Drawer pull (middle tier) | Brushed nickel plated zinc alloy | |
| Internal rotation pivot hardware | Carbon steel rotating bearing assembly | |
| Drawer slides | Side-mounted soft-close ball bearing slides | |
| Interior drawer lining | Matte black anti-scratch melamine finish | |
| Base contact pads | Non-slip felt pads | |
| Drawer panel edge banding | 0.6mm thick PVC edge banding matched to veneer tone | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Independent tier rotation | Each drawer unit rotates 360 degrees around central pivot | |
|---|---|---|
| Soft-close drawer operation | Drawers close silently with self-latching mechanism | |
| Single-tab drawer actuation | Vertical pull tabs require 12N pull force to open | |
| Stacked modular alignment | Locating pins between tiers prevent lateral slippage | |
| Smooth rotation operation | Sealed bearing provides 360 degree swivel with 5N rotational force | |
| Scratch-resistant top surface | UV-cured lacquer resists minor abrasions from daily use | |
| Floor protection design | Felt base pads eliminate scuffs on hardwood or tile floors | |
| Flush-front storage design | Drawer fronts sit flush with enclosure edges when closed | |
| Stack rotation offset per drawer | 18 degrees | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential bedroom bedside use | Placed adjacent to beds for storage of books, devices and personal items | |
|---|---|---|
| Modern living room side table use | Positioned next to sofas for remote controls, drinks and decorative objects | |
| Contemporary studio accent storage | Used as standalone sculptural storage in open-plan living spaces | |
| Home office under-desk storage | Placed beside home office desks for stationery and document storage | |
| Luxury hotel guest room furnishing | Installed in boutique hotel rooms for guest amenity and personal item storage | |
| Recommended matching furniture | Pairs with low-profile walnut wood bed frames, minimalist sofas and neutral tone decor |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and strength requirements for domestic storage furniture, applicable for stability verification | |
|---|---|---|
| EN 12520:2015 | Furniture seating and storage strength, durability and stability requirements | |
| EN 71-3:2019 | Migration of certain elements, applicable for surface finish safety in residential use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for panel strength and finish durability | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing | |
| GB/T 4893.4-2013 | Surface furniture wear resistance test, applicable for veneer lacquer finish performance | |
| GB/T 10357.5-2011 | Furniture mechanical performance test for storage units, applicable for drawer load testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for panel strength and finish durability; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing; 3. GB/T 4893.4-2013: Surface furniture wear resistance test, applicable for veneer lacquer finish performance; 4. GB/T 10357.5-2011: Furniture mechanical performance test for storage units, applicable for drawer load testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
