| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Finished Top Thickness | 50 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Workstation distributed desktop load | 80 kg | |
|---|---|---|
| Single cabinet shelf load | 25 kg | |
| Rollaway bed static load | 150 kg | |
| Rollaway bed recommended user weight | 120 kg | |
| Mattress foam density | 35 kg/m3 | |
| Seating capacity | 1 person | |
| Bed occupancy | 1 adult | |
| Pull-out bed rolling cycle target | 10000 cycles | |
| product net weight | 145 kg | |
| Top Static Load Reference | 150 kg uniformly distributed |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Work surface | 25 mm melamine-faced particleboard with light oakgrain finish and sealed PVC edges | |
|---|---|---|
| Privacy screen fabric | Dark gray woven fabric over panel core with straight stitched or trimmed edges | |
| Screen infill panel | Light gray smooth panel section in an aluminum or steel extrusion frame | |
| Side cabinet doors | Light oakgrain melamine door and white melamine side/end panel | |
| Cabinet carcass | Melamine-faced board panels with concealed hinges and vertical storage cavity | |
| Vertical support legs | White powder-coated square steel or aluminum legs with leveling feet | |
| Under-desk modesty panels | Light gray rigid panel with horizontal trim and metal vertical posts | |
| Bed frame | Light gray powder-coated steel folding tube frame with welded or bolted U-shaped end frames | |
| Mattress | Gray fabric upholstery over 80 mm foam pad divided into three hinged cushion sections | |
| Casters | Black twin-wheel nylon casters with metal mounting stems on the bed frame | |
| Fasteners and hinges | Steel hinges, connector bolts, cam locks, and leveling feet for knock-down installation | |
| Edge and frame trims | PVC edge banding on board components with silver-gray metal or plastic screen extrusions |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| L-shaped work layout | Continuous corner desktop provides a primary writing zone and a perpendicular return zone for documents or devices | |
|---|---|---|
| Privacy division | Three low divider panels enclose the rear and sides to separate adjacent workers without blocking room visibility | |
| Integrated guest bed | Three-section upholstered bed pulls out from the under-desk cabinet and unfolds into a 1900 mm single sleeping surface | |
| Under-desk storage | Open front cabinet cavity conceals the folded bed and provides side-door access when the bed is stowed | |
| Mobile bed deployment | Four or more swivel casters allow the folded bed to roll straight out from the knee opening | |
| Folding mattress support | Hinged steel sections align the three cushion segments into a flat platform and fold compactly for storage | |
| Leveling installation | Desk support feet adjust independently to compensate for uneven office flooring | |
| Cable routing | A circular grommet at the rear corner provides cable passage from desktop devices toward the underside | |
| Side access door | Hinged light wood door swings outward to expose the bed-storage cavity and limit access swing clearance | |
| Knock-down assembly | Desktop, screen panels, cabinets, legs, and bed frame ship as separate components for on-site assembly | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Largest carton dimensions | 1850 x 760 x 180 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan office | Suits one-person focused workstations where staff need visual division and an occasional on-site rest option | |
|---|---|---|
| Shift-based workplace | Useful for control rooms, medical offices, security posts, and 24-hour operations requiring short rest periods | |
| Staff rest or duty room | Provides combined computer work, document storage, and temporary sleeping without needing a separate guest bed | |
| Small private office | Maximizes limited space by combining an L-shaped desk, side storage, divider panels, and visitor rest surface in one unit | |
| Emergency overnight office | Supports contingency overnight stays where a compact single bed is required for one adult | |
| Procurement configuration | Recommended for projects requiring coordinated light oak, white, gray fabric, and black caster finishes across multiple workstations | |
| Facility-managed installation | Requires clear front clearance for bed pull-out and door swing, making layout planning essential before row installation |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 applicability | Office desks and worktables safety, strength, and durability requirements for the seated work surface | |
|---|---|---|
| EN 527-2:2011 applicability | Office desk dimensional safety requirements, including desk height and leg-room clearance verification | |
| EN 16139:2013+A1:2024 applicability | Strength, durability, and stability requirements for non-domestic seating, applicable to the foldaway bed support if used as rest seating | |
| EN 1022:2018 applicability | Seating stability test method, suitable for evaluating the unfolded bed frame on a level floor | |
| EN 13722:2004 applicability | Furniture test methods for beds, applicable to folding bed strength and sleep-surface stability | |
| EN 71-1:2014+A2:2023 applicability | Useful sharp-edge and pinch-point reference if the workstation is installed in family-accessible office areas |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 applicability | Office desk strength, durability, and structural safety tests for desktop, legs, and modesty supports | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 applicability | Storage cabinet performance tests for doors, shelves, hinges, and stability of the integrated cabinet | |
| ANSI/BIFMA X5.4-2022 applicability | Lounge seating strength and durability reference for the cushioned folding rest surface if classified as office lounge seating | |
| ANSI/BIFMA X5.1-2017 (R2022) applicability | Seating structural test reference where foldaway bed use includes seated loading rather than sleeping only | |
| ANSI/BIFMA e3-2024 applicability | Sustainability certification framework for panel materials, finishes, low-emission cores, and supplier chemical documentation |
Standards applicable to China-market projects
| GB/T 3324-2024 applicability | General technical requirements for wooden furniture, applicable to dimensional accuracy, edge finishing, and panel workmanship of board components | |
|---|---|---|
| GB/T 3325-2017 applicability | Metal furniture technical requirements, applicable to the steel bed frame, support legs, coating, and welded or bolted joints | |
| GB/T 3326-2016 applicability | Furniture dimensional inspection, applicable to verifying desktop height, clearance, bed size, and cabinet dimensions | |
| GB 18580-2017 applicability | Formaldehyde emission limit for wood-based panels, applicable to particleboard components used in indoor office furniture | |
| GB/T 10357.6-2013 applicability | Furniture mechanical test for single-bed strength and stability, suitable as a bed-frame acceptance reference | |
| GB/T 27921-2011 applicability | Risk management guidance for packaging, handling, assembly instructions, and small-part safety documentation |
This product must meet the following technical requirements: 1. GB/T 3324-2024 applicability: General technical requirements for wooden furniture, applicable to dimensional accuracy, edge finishing, and panel workmanship of board components; 2. GB/T 3325-2017 applicability: Metal furniture technical requirements, applicable to the steel bed frame, support legs, coating, and welded or bolted joints; 3. GB/T 3326-2016 applicability: Furniture dimensional inspection, applicable to verifying desktop height, clearance, bed size, and cabinet dimensions; 4. GB 18580-2017 applicability: Formaldehyde emission limit for wood-based panels, applicable to particleboard components used in indoor office furniture; 5. GB/T 10357.6-2013 applicability: Furniture mechanical test for single-bed strength and stability, suitable as a bed-frame acceptance reference; 6. GB/T 27921-2011 applicability: Risk management guidance for packaging, handling, assembly instructions, and small-part safety documentation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
