Single-Person Curved Corner L-Shaped Cubicle Workstation Desk with Integrated Storage Pedestal (model CUB-COR-1600-OAK-WHT) is listed under L-Shaped Office Desk, with overall dimensions of 1600 × 1600 × 1200 mm and main material of Particle‑board (PB). Load capacity: 100 kg. Certifications: modular,cubicle,structure,light,oak,and,white,finish,3-sided,privacy,partition,integrated,drawer,cabinet. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall workstation footprint | 1600 x 1600 x 1200 mm | |
|---|---|---|
| Standard work surface height | 750 mm | |
| Work surface depth at straight segments | 600 mm | |
| Curved front knee opening width | 800 mm | |
| Under-desk seated knee clearance height | 650 mm | |
| Partition panel thickness | 40 mm | |
| Upper partition frame height above desk | 450 mm | |
| Lower solid modesty panel height below desk | 700 mm | |
| Integrated right-side storage pedestal dimensions | 500 x 600 x 700 mm | |
| Top drawer internal usable height | 120 mm | |
| Lower cabinet door internal usable height | 500 mm | |
| Desk panel thickness (work surface) | 25 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Work surface static load capacity | 100 kg | |
|---|---|---|
| Overall workstation net weight | 85 kg | |
| Recommended maximum user weight for paired chair | 120 kg | |
| Surface abrasion resistance | 2000 cycles | |
| Standard commercial product warranty | 5 years | |
| Partition frame connection repeat assembly cycles | 10 cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Work surface panel | 25mm melamine-faced particleboard with 2mm PVC edge banding | |
|---|---|---|
| Partition frame | Powder-coated aluminum extrusion with white finish | |
| Lower partition modesty panels | 18mm melamine-faced particleboard, wood-tone and white finish | |
| Upper partition screen | Frosted semi-transparent acrylic panel | |
| Storage pedestal cabinet | 18mm melamine-faced particleboard, oak body with white drawer front | |
| Drawer hardware | Cold-rolled steel full-extension ball-bearing slides with keyed lock |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Cable management system | Internal partition routing channels + desk surface cable grommet | |
|---|---|---|
| Storage pedestal configuration | 1 lockable top stationery drawer + 1 lower lockable storage cabinet | |
| Modular partition connection | Tool-fastened aluminum joint brackets | |
| Curved front work edge | Rounded concave user-facing edge |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan office individual workstations | Provides 3-sided seated privacy to reduce distraction in shared office spaces | |
|---|---|---|
| Small business startup office layouts | Compact 1600mm footprint fits high-density work areas without wasted space |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office worktables safety and strength requirements, applies to work surface structural performance | |
|---|---|---|
| EN 1335-1:2020 | Office chairs dimensional and safety requirements, applies to the paired ergonomic task chair | |
| EN 1022:2018 | Seating furniture stability test standard, applies to chair anti-tipping performance |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 Desk Load Test | Requires 100kg distributed static load without structural failure | |
|---|---|---|
| ANSI/BIFMA X5.11-2015 | General-purpose office chairs load rating standard supporting 136kg maximum user weight |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden office furniture, applies to panel structural performance | |
|---|---|---|
| GB/T 35607-2017 | Formaldehyde emission limits for wood-based furniture panels, requires E0/E1 grade for indoor office use | |
| GB/T 10357.1-1989 | Desk and table stability and mechanical strength test methods, applies to work surface load testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden office furniture, applies to panel structural performance; 2. GB/T 35607-2017: Formaldehyde emission limits for wood-based furniture panels, requires E0/E1 grade for indoor office use; 3. GB/T 10357.1-1989: Desk and table stability and mechanical strength test methods, applies to work surface load testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp