| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall unit dimensions | 2400 x 600 x 1100 mm | |
|---|---|---|
| Per-seat work surface size | 1200 x 600 mm | |
| Standard work surface height | 750 mm | |
| Under-desk knee clearance height | 620 mm | |
| Low privacy divider height above desk | 350 mm | |
| Upper frame rail total height above floor | 1100 mm | |
| Worktop thickness | 25 mm | |
| Mobile pedestal dimensions | 400 x 500 x 600 mm | |
| PVC edge banding thickness | 2 mm | |
| Steel frame tube section size | 30 x 30 mm | |
| Cable grommet diameter | 60 mm | |
| Modesty panel height below worktop | 450 mm | |
| Caster diameter on mobile pedestals | 50 mm | |
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall |
Net weight / load capacity / users / durability
| Worktop static uniform load capacity | 100 kg | |
|---|---|---|
| Drawer slide open/close cycle rating | 50000 cycles | |
| Cabinet hinge open/close cycle rating | 100000 cycles | |
| Work surface abrasion resistance | 2000 cycles | |
| Steel frame powder coating thickness | 65 um | |
| Powder coating salt spray resistance | 72 h | |
| Work surface finish pencil hardness | 8H | |
| Total unit net weight (including pedestals) | 100 kg | |
| Recommended maximum user weight per seat | 120 kg | |
| Top Static Load Reference | 150 kg uniformly distributed |
Core acceptance fields · Panels / hardware / frame / upholstery
| Worktop substrate | E1-grade particle board | |
|---|---|---|
| Worktop surface finish | Light beech-tone melamine laminate | |
| Desk and pedestal edge protection | 2mm thick matching PVC edge banding | |
| Frame and partition support structure | Powder-coated square steel tubing | |
| Partition and modesty panels | Melamine-faced MDF panels | |
| Mobile pedestal casters | Black nylon swivel casters, 4 per cabinet | |
| Drawer and door hardware | Zinc-alloy pull handles and steel hinges | |
| Cable grommet trim | ABS plastic grommets | |
| Frame connection hardware | Zinc-plated steel connector bolts and cam locks | |
| Pedestal storage compartments | Steel-reinforced drawer and cabinet box structure | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm |
Adjustment / rotation / tilt / mobility / storage features
| Two independent seated work positions | Side-by-side layout separated by central divider, unobstructed knee clearance for each user | |
|---|---|---|
| Lockable mobile under-desk pedestals | One cabinet per user, fitted with 4 swivel casters for repositioning, 1 top drawer and 1 lower door compartment | |
| Integrated cable management | 60mm diameter grommet on each work surface routes cables from desk top to floor area | |
| Low-profile privacy dividers | 350mm high desk-mounted panels reduce visual distraction between adjacent users without blocking overhead light | |
| Full-height side modesty panels | 450mm high panels below worktop block view of seated users' legs from side aisles | |
| Knock-down flat-pack assembly | Bolted steel frame and panel connections allow on-site assembly without specialized welding tools | |
| Adjustable floor glides | Leveling glides at frame base compensate for uneven office flooring | |
| Reconfigurable modular design | Frame rail system allows connection to additional adjacent workstations for larger team layouts | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
Recommended spaces / users / usage modes
| Open-plan office staff work areas | Side-by-side layout fits linear office floor plans for clerical, administrative or finance teams | |
|---|---|---|
| Small business shared workspaces | Compact 2.4m length fits small office footprints without separate private offices | |
| Call center and data entry work zones | Low dividers reduce cross-talk distraction while allowing supervisor line of sight | |
| Temporary project team setups | Modular frame allows reconfiguration as team sizes and project needs change | |
| Government and institutional office areas | Durable commercial-grade construction meets high-traffic public sector office use requirements |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office work tables and desks, safety and dimensional requirements for work surfaces | |
|---|---|---|
| EN 527-2:2002 | Office work tables, mechanical safety requirements and test methods for structural stability | |
| EN 13722:2004 | Office furniture, storage cabinets performance requirements for mobile pedestals |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products standard, applicable to worktop load, stability and durability testing | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage units standard, applicable to mobile pedestal load and caster performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to desk panels and storage cabinets | |
|---|---|---|
| GB/T 3327-2020 | Office desks and tables, applicable to work surface height, dimensional tolerance and stability | |
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, applicable to E1-grade substrate compliance | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables, applicable to static load and stability verification | |
| GB/T 5296.6-2004 | Furniture product labeling requirements, applicable to shipping and installation documentation |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to desk panels and storage cabinets; 2. GB/T 3327-2020: Office desks and tables, applicable to work surface height, dimensional tolerance and stability; 3. GB 18580-2017: Formaldehyde emission limits for wood-based panels, applicable to E1-grade substrate compliance; 4. GB/T 10357.1-2013: Furniture mechanical performance test for tables, applicable to static load and stability verification; 5. GB/T 5296.6-2004: Furniture product labeling requirements, applicable to shipping and installation documentation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
