| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Finished Top Thickness | 50 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 168 kg per four-person cluster | |
|---|---|---|
| Desktop distributed load | 60 kg per position | |
| Desktop point-load resistance | 30 kg at 100 mm diameter contact area | |
| Partition self-support stability | 1200 mm panel height with floor glides and corner-post bracing | |
| Floor loading | 21.4 kg/m2 | |
| Recommended occupancy | 4 users per cluster, 1 person per desk bay | |
| Leveling adjustment | 12 mm threaded glide travel | |
| Typical service life target | 8 years under daily office use | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Structural posts | 45 x 45 mm powder-coated square steel posts with corner connectors | |
|---|---|---|
| Horizontal rails | Rectangular powder-coated steel rails lock into vertical posts | |
| Work surface | 25 mm light-gray melamine-compressed wood board with sealed edge banding | |
| Lower privacy panels | Light-gray fabric or laminate-faced composite panels in steel rail frames | |
| Middle acoustic band | Dark-gray ribbed fabric-covered panel, 12 mm core thickness | |
| Upper lattice infill | Light-gray horizontal slats with open spacing, composite or coated steel construction | |
| Modesty panels | Dark-gray steel or steel-faced composite panels below each work surface | |
| Base trim | Dark-gray kick rail with removable access covers at each under-desk bay | |
| Foot glides | Black nylon or polypropylene circular glides on threaded steel stems | |
| Cable grommet | 65 mm black plastic round grommet with removable cap | |
| Panel-to-frame hardware | Concealed steel cam and screw connectors with post cover strips | |
| Surface finish | Matte gray powder coating on exposed metal and matte light-gray desktop facing |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Four-position layout | Cross-connected cubicle cluster provides four individually oriented workstations | |
|---|---|---|
| Privacy screening | 1200 mm high panels shield seated torso and monitor area while retaining open visibility above | |
| Cable entry | A 65 mm desktop grommet routes monitor and power cables from desk surface to under-desk zone | |
| Under-desk cable access | Removable rectangular base covers allow horizontal cable routing along the kick-rail zone | |
| Floor leveling | Threaded foot glides compensate for uneven floors and keep panel frames plumb | |
| Modular extension | Post-and-rail panel system permits adding adjacent seats by sharing common posts | |
| Reversible desk orientation | Each 1200 x 600 mm top can face outward from the shared partition core | |
| Space division | Upper lattice band reduces direct sightlines without creating a fully enclosed cell | |
| Freestanding installation | The cluster stands on floor glides without visible wall attachment or ceiling track | |
| Maintenance access | Base trims and panel frames provide access points for cable and connector servicing | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan office | Four independent seats suit call centers, administration teams, and shared service departments | |
|---|---|---|
| Task processing area | The 1200 x 600 mm tops support a monitor, keyboard, telephone, and document space | |
| Staff density planning | A 2800 x 2800 mm cluster can be repeated in grid layouts with circulation aisles | |
| Project-based teams | Symmetric bays allow small teams to sit around one shared partition core while keeping separate work surfaces | |
| Noise and sightline control | Ribbed middle panels and solid lower bands reduce visual distraction in busy offices | |
| Flexible office expansion | Shared posts and modular panels support later addition of seats or partition runs |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.5 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
