| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall unit dimensions | 1800 x 1460 x 990 mm | |
|---|---|---|
| Individual seat center-to-center width | 590 mm | |
| Seat height above finished floor | 440 mm | |
| Seat cushion usable depth | 485 mm | |
| Seat cushion usable width | 480 mm | |
| Backrest total height from seat surface | 550 mm | |
| Integrated writing tablet dimensions | 450 x 300 x 18 mm | |
| Floor mounting footplate dimensions | 220 x 120 mm | |
| Frame leg tube cross-section | 80 x 40 mm | |
| Writing tablet height above seat surface | 260 mm | |
| Knee clearance under writing tablet | 200 mm | |
| Side end panel thickness | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total 6-seat unit static load capacity | 900 kg | |
|---|---|---|
| Single individual seat static load rating | 150 kg | |
| Seat cushion foam density | 60 kg/m³ | |
| Backrest foam density | 60 kg/m³ | |
| Seat cushion foam thickness | 140 mm | |
| Backrest foam thickness | 120 mm | |
| Upholstery fabric abrasion resistance | 50000 Martindale cycles | |
| Powder-coated frame corrosion resistance | 500 hours salt spray | |
| Net weight per individual seat | 18 kg | |
| Reference Static Load | 150 kg depending on category |
Core acceptance fields · Panels / hardware / frame / upholstery
| Structural frame | 2.5 mm thick cold-rolled steel with electrostatic powder coating | |
|---|---|---|
| Seat internal support panel | 15 mm thick 7-layer hardwood plywood | |
| Backrest internal support panel | 15 mm thick 7-layer hardwood plywood | |
| Upholstery fabric | Flame-retardant, stain-resistant woven public seating fabric | |
| Writing tablet core and surface | 18 mm MDF core with fire-resistant melamine laminate, PU edge banding | |
| Side end panels | 2 mm thick molded PP composite with two-tone grey/white finish | |
| Floor mounting hardware | Galvanized steel expansion anchor bolts | |
| Seat mechanism hardware | Powder-coated steel torsion spring return assembly | |
| Tablet support brackets | Die-cast aluminum alloy with anti-rust finish | |
| Edge trim components | Soft PVC rounded edge trim on tablet and panel edges | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Seat cushion return function | Silent torsion-spring automatic tip-up return when unoccupied | |
|---|---|---|
| Floor-fixed installation | Permanent anchoring via expansion bolts to concrete finished floors | |
| Integrated writing surface | Fixed shared tablet positioned between opposing seat pairs for note-taking or device placement | |
| Modular row expansion | Connectable modular units allow variable row lengths for custom waiting area layouts | |
| Seating separation | Individual divided seat cushions and backrests define personal seating space | |
| Easy-clean surfaces | Smooth powder-coated frame and non-porous laminate tablets allow wipe-down cleaning | |
| Anti-tip structural design | Wide flared floor footplates distribute load across floor surface | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Transit terminal waiting areas | Suitable for airport, railway, and bus station waiting zones with high passenger turnover | |
|---|---|---|
| Public service hall waiting zones | Appropriate for government office, hospital, and bank waiting areas | |
| Educational institution exam/waiting zones | Suitable for campus registration, examination waiting, and student service areas | |
| Indoor public concourse seating | Designed for permanent indoor installation in covered public concourses | |
| High-capacity waiting layouts | Back-to-back layout maximizes seating density without sacrificing user personal space |
EU Market Access Requirements* EN Standards
| EN 13761:2002 | Public seating furniture – Performance requirements for general public use | |
|---|---|---|
| EN 1022:2018 | Furniture – Seating – Determination of stability, applicable to fixed units | |
| EN 13501-1:2018 | Fire classification of construction products for upholstered public furniture |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | General purpose office chairs – Strength and durability reference for seated loads | |
|---|---|---|
| ANSI/BIFMA X6.1-2018 | Educational seating – Reference for integrated writing surface performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to steel frame structure | |
|---|---|---|
| GB 20286-2006 | Flame retardant requirements for public place furniture upholstery components | |
| GB/T 10357.3-2013 | Furniture mechanical performance test for chair and stool strength and durability | |
| GB/T 35607-2017 | Limit of harmful substances in upholstered furniture for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to steel frame structure; 2. GB 20286-2006: Flame retardant requirements for public place furniture upholstery components; 3. GB/T 10357.3-2013: Furniture mechanical performance test for chair and stool strength and durability; 4. GB/T 35607-2017: Limit of harmful substances in upholstered furniture for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
