| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall single armchair dimensions | 950 x 850 x 900 mm | |
|---|---|---|
| Seat height from finished floor | 450 mm | |
| Seat usable width | 580 mm | |
| Seat usable depth | 550 mm | |
| Backrest total height above seat | 450 mm | |
| Armrest height above seat surface | 180 mm | |
| Armrest top width | 150 mm | |
| Decorative wood panel thickness | 30 mm | |
| Cushion front edge radius | 20 mm | |
| Base plinth height from floor | 120 mm | |
| Matching side table dimensions | 650 x 650 x 550 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Single chair net weight | 45 kg | |
|---|---|---|
| Static seat load capacity | 150 kg | |
| Armrest vertical static load | 70 kg | |
| Seat foam indentation load deflection | 45 kg/m³ | |
| Back foam density | 35 kg/m³ | |
| Foam rebound rate | 40% | |
| Recommended seating duration per use | 240 minutes | |
| Seam stitch durability | 6000 cycles | |
| Seat foam density | 45 kg/m³ | |
| Backrest foam density | 35 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main upholstery fabric | Ivory fine-ribbed woven fabric, 350 g/m² surface weight, anti-pilling treatment | |
|---|---|---|
| Seat cushion core | High-density polyurethane foam, 100 mm thick on seating surface, wrapped in non-woven fabric liner | |
| Backrest padding | Medium-density polyurethane foam, 80 mm thick, contoured for lumbar support | |
| Armrest padding | Medium-density polyurethane foam, 60 mm thick, fully wrapped over wood arm structure | |
| Internal load-bearing frame | Kiln-dried solid hardwood frame, 40 mm thick structural members, corner-block reinforced | |
| Decorative trim panels | Dark red-brown stained solid wood, polished lacquer finish, geometric inlay design on arms and base | |
| Side table tabletop | Medium density fiberboard core with dark red-brown wood veneer, high-gloss polyurethane lacquer finish | |
| Side table legs and stretchers | Solid hardwood, carved decorative cross stretcher under tabletop, matching wood finish | |
| Feet glides | 5 mm thick black hard plastic glides at all base corners, floor-protecting non-slip design | |
| Upholstery stitching | High-tenacity polyester thread, 8 mm seam pitch, matching piping along all cushion and panel edges | |
| Exterior decorative trim panels | Dark red-brown stained solid beech wood, matte polished polyurethane lacquer finish, geometric framed detailing on arms and base sections | |
| Matching side table tabletop | 18 mm thick medium density fiberboard core, dark red-brown wood veneer finish, 3 coats of high-gloss polyurethane lacquer |
Adjustment / rotation / tilt / mobility / storage features
| Seating orientation | Fixed upright formal seating posture, no recline or tilt mechanism, designed for official meeting and reception use | |
|---|---|---|
| Cushion support | Fixed attached seat cushion with no removable cover, secured to frame with hidden fasteners to prevent shifting during use | |
| Arm support | Fully padded fixed armrests on both sides, providing consistent support for sitting, standing and forearm resting during conversations | |
| Side table function | Central side table positioned between two chairs for placement of tea service, meeting documents, name cards and small personal items, with carved under-table clearance for legroom if pulled closer | |
| Floor protection | Integrated plastic glides on all chair feet prevent scratching polished tile, stone or wood flooring, suitable for high-end reception spaces | |
| Structural stability | Wide box-style base frame with full perimeter contact points eliminates rocking on level hard floors, designed for high-traffic commercial environments | |
| Style coordination | Matching upholstery and wood trim across all chairs and side table creates a uniform formal aesthetic for official reception areas, VIP meeting rooms and government-style lounge spaces | |
| Seating posture support | Fixed upright 100-degree back angle, no recline, tilt or swivel mechanism, designed to maintain formal upright posture during official meetings and VIP receptions | |
| Cushion securement | Fixed non-removable seat and back cushions, secured to the internal frame with hidden metal clips and hook-and-loop fasteners to prevent shifting during use | |
| Matching side table utility | Positioned flush between two single sofas to hold tea service, meeting documents, name cards and small personal items, with 430 mm under-table clearance for legroom when pulled closer for use | |
| Floor protection performance | Integrated hard plastic glides on all sofa and table feet prevent scratching polished tile, stone or wood flooring, with no sharp metal contact points for high-end finished spaces | |
| Structural stability design | Wide full-perimeter box-style base with 8 contact points per sofa eliminates rocking on level hard floors, engineered for high-traffic commercial reception environments |
Verified carton / gross weight / assembly / loading data
| Packaging count per armchair | 1 unit per carton, fully assembled knock-down optional | |
|---|---|---|
| Single armchair carton dimensions | 1050 x 950 x 720 mm | |
| Matching side table carton dimensions | 750 x 750 x 620 mm | |
| Single chair packaged gross weight | 55 kg | |
| Side table packaged gross weight | 22 kg | |
| Per chair CBM volume | 0.72 CBM | |
| Per side table CBM volume | 0.35 CBM | |
| On-site assembly time per chair | 15 minutes | |
| 20ft GP container loading capacity (chairs only) | 36 units | |
| Standard surface protection packaging | 5-layer corrugated carton, 20 mm EPE foam wrap, hard corner protectors, plastic film dust cover |
Recommended spaces / users / usage modes
| Government and official reception rooms | Formal upright design and uniform aesthetic match the requirement for dignified, professional VIP and official meeting spaces | |
|---|---|---|
| Corporate executive lounge areas | Comfortable upright seating supports extended meetings between executives and guests without overly casual posture | |
| Hotel lobby VIP waiting zones | Durable commercial-grade upholstery and classic styling blends with high-end hotel interiors while withstanding frequent guest use | |
| Boardroom supplementary seating | Can be placed in pairs with side tables around boardroom perimeters for breakout discussion or guest overflow seating | |
| Institutional meeting facilities | Sturdy frame construction and easy-to-clean fabric meet the demands of frequent daily use in public institutional facilities | |
| Recommended configuration | 2 armchairs paired with 1 central side table as the standard reception module, scalable to 4 chairs and 2 tables for larger reception bays | |
| Government and official VIP reception rooms | Formal upright design and uniform dignified aesthetic meet requirements for official government reception spaces for visiting dignitaries and formal meetings | |
| Corporate executive reception and lounge areas | Medium-firm cushioning and full arm support support extended meetings between executives and guests without overly casual relaxed posture |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| Seating structural strength recommendation | GB/T 3324 General technical requirements for wooden furniture, applicable to strength and stability verification of wood-framed reception seating | |
|---|---|---|
| Upholstered furniture durability recommendation | GB/T 2012 Upholstered furniture: Sofas, applicable to seat and back durability, load and safety testing for reception seating | |
| Formaldehyde emission limit recommendation | GB 18584 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based furniture, applicable to verification of wood panel and adhesive emissions | |
| Fabric colorfastness recommendation | GB/T 3920 Textiles - Tests for color fastness to rubbing, applicable to verification of upholstery fabric resistance to discoloration from regular use | |
| Wooden furniture structural strength recommendation | GB/T 3324 General technical requirements for wooden furniture, applicable to structural strength and stability verification of the wood-framed sofa and side table | |
| Upholstered sofa durability recommendation | GB/T 2012 Upholstered furniture: Sofas, applicable to seat/back durability, static load and safety performance testing for reception seating |
This product must meet the following technical requirements: 1. Seating structural strength recommendation: GB/T 3324 General technical requirements for wooden furniture, applicable to strength and stability verification of wood-framed reception seating; 2. Upholstered furniture durability recommendation: GB/T 2012 Upholstered furniture: Sofas, applicable to seat and back durability, load and safety testing for reception seating; 3. Formaldehyde emission limit recommendation: GB 18584 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based furniture, applicable to verification of wood panel and adhesive emissions; 4. Fabric colorfastness recommendation: GB/T 3920 Textiles - Tests for color fastness to rubbing, applicable to verification of upholstery fabric resistance to discoloration from regular use; 5. Wooden furniture structural strength recommendation: GB/T 3324 General technical requirements for wooden furniture, applicable to structural strength and stability verification of the wood-framed sofa and side table; 6. Upholstered sofa durability recommendation: GB/T 2012 Upholstered furniture: Sofas, applicable to seat/back durability, static load and safety performance testing for reception seating; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
