| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 3400 x 2400 x 900 mm | |
|---|---|---|
| 3-seater sofa dimensions | 2200 x 900 x 900 mm | |
| Single-seater sofa dimensions | 1000 x 900 x 900 mm | |
| Coffee table dimensions | 1400 x 800 x 500 mm | |
| Seat height from floor | 450 mm | |
| Seat depth | 650 mm | |
| Backrest height above seat | 450 mm | |
| Wooden armrest width | 180 mm | |
| Coffee table lower shelf height from floor | 150 mm | |
| Clearance between sofa seat and floor | 120 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total set net weight | 280 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Seat foam density | 45 kg/m³ | |
| Back foam density | 35 kg/m³ | |
| Recommended maximum seating capacity | 5 people | |
| Seat cushion compression recovery rate | 95% | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Wood frame joint static load cycle rating | 10000 cycles | |
| Maximum rated seating capacity | 5 people | |
| Wood frame joint load cycle rating | 10000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | White smooth PU leather | |
|---|---|---|
| Frame and decorative trim | Solid red hardwood with high-gloss lacquer finish | |
| Seat cushion padding | High-density polyurethane foam | |
| Backrest padding | Medium-density polyurethane foam | |
| Sofa base feet | Stainless steel non-slip glide feet | |
| Coffee table tabletop | Solid red hardwood with high-gloss lacquer finish, matching sofa wood trim | |
| Coffee table lower shelf | Solid wood panel, matching table top finish | |
| Frame joinery | Reinforced corner block and screw-fastened wood joints | |
| Upholstery stitching | Precision matching white thread stitching with 8mm seam pitch | |
| Wood surface coating | Scratch-resistant polyurethane lacquer | |
| Frame, armrests and trim | Solid red hardwood with high-gloss scratch-resistant polyurethane lacquer finish | |
| Seat support system | 4mm diameter sinuous steel springs spaced 100mm apart, with 50mm thick elastic webbing layer |
Adjustment / rotation / tilt / mobility / storage features
| Fixed position seating configuration | Fixed non-reclining upright seat and back angles designed for formal guest reception | |
|---|---|---|
| Integrated wide wood armrests | 180mm wide flat solid wood armrests provide stable surface for placing cups or small items | |
| Coffee table open lower storage | Full-width lower open shelf provides storage for magazines, tea supplies or decorative items | |
| Modular set arrangement | 3-seater and two single-seater units can be arranged in L-shape, opposite layout or linear layout to fit different room sizes | |
| Non-marking floor glides | Stainless steel glide feet prevent floor scratching and allow easy repositioning without lifting | |
| Stain-resistant upholstery surface | Smooth PU leather surface allows wipe cleaning of spills for easy daily maintenance | |
| Frame edge impact protection | Routed and polished wood trim edges eliminate sharp corners to prevent impact injury | |
| Even weight distribution seat base | Sinuous spring support under seat cushions prevents sagging under extended use | |
| Fixed upright seating position | Rigid non-reclining seat and back angle set to 105 degrees for formal guest reception, no tilt or recline mechanisms integrated | |
| Wide integrated hardwood armrests | 180mm wide flat solid wood armrests provide a stable surface for placing cups, mobile phones or notepads during meetings | |
| Matched table storage and surface space | Central coffee table includes a full-width lower open shelf for storing magazines, tea supplies or documents; linking side table provides extra surface between seating units | |
| Flexible modular arrangement | Three separate seating units and two tables can be arranged in U-shape, L-shape, opposite or linear layout to fit reception rooms from 15sqm to 30sqm |
Verified carton / gross weight / assembly / loading data
| Total number of packages | 6 | |
|---|---|---|
| Largest package dimensions | 2250 x 950 x 650 mm | |
| Total gross shipping weight | 320 kg | |
| Total shipping volume | 2.8 CBM | |
| Required assembly time | 120 minutes | |
| 40HQ container loading quantity | 18 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item |
Recommended spaces / users / usage modes
| Executive office reception areas | Formal two-tone wood and white upholstery design matches traditional executive office decor for welcoming important guests | |
|---|---|---|
| Government and institutional meeting waiting rooms | Formal upright seating and durable construction suitable for high-traffic public sector waiting areas | |
| Hotel business lounge areas | Coordinated 3+1+1 set with matching coffee table provides cohesive seating for hotel guest reception areas | |
| Corporate boardroom ante rooms | Conservative professional styling complements formal boardroom interiors for pre-meeting guest waiting | |
| VIP guest reception suites | High-end wood finish and clean upholstery presents a formal, respectful environment for receiving distinguished visitors | |
| Government and institutional waiting rooms | Durable solid wood construction and upright formal seating meets requirements for high-traffic public sector meeting and guest waiting areas | |
| Hotel business lounge and VIP reception areas | Coordinated 3+1+1 seating set with matched tables creates a cohesive, premium seating arrangement for hotel guest reception and business meetings | |
| State-owned enterprise guest reception suites | High-gloss hardwood finish and tailored upholstery presents a respectful, formal environment for receiving distinguished official visitors |
EU Market Access Requirements* EN Standards
| EN 13759:2008 | Domestic and contract seating - Safety requirements, applicable for structural safety and stability of reception sofas | |
|---|---|---|
| EN 1022:2018 | Domestic furniture - Seating - Determination of stability, recommended as stability test criteria for all seating units | |
| EN 14372:2004 | Furniture - Hardware for furniture - Performance requirements, applicable for screws, joint connectors and fasteners used in frame construction |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood frame and wood table components for structural safety and finish quality | |
|---|---|---|
| GB/T 19001-2016 | Quality management system requirement, recommended for supplier production process control for commercial furniture orders | |
| GB 20400-2006 | Limit of harmful substances in leather and fur, applicable to PU leather upholstery material for formaldehyde and VOC content limits | |
| GB/T 35607-2017 | Evaluation standard for green product certification for furniture, recommended as procurement acceptance criteria for low-VOC materials | |
| GB/T 10357.1-2013 | Test method for furniture mechanical performance for seating, applicable for static load and durability testing of sofa frames and seats | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable if engineered wood panels are used in non-visible frame components for formaldehyde emission limits |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame and wood table components for structural safety and finish quality; 2. GB/T 19001-2016: Quality management system requirement, recommended for supplier production process control for commercial furniture orders; 3. GB 20400-2006: Limit of harmful substances in leather and fur, applicable to PU leather upholstery material for formaldehyde and VOC content limits; 4. GB/T 35607-2017: Evaluation standard for green product certification for furniture, recommended as procurement acceptance criteria for low-VOC materials; 5. GB/T 10357.1-2013: Test method for furniture mechanical performance for seating, applicable for static load and durability testing of sofa frames and seats; 6. GB/T 4897.3-2003: Particleboard for furniture use, applicable if engineered wood panels are used in non-visible frame components for formaldehyde emission limits; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
