| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall per-seat dimensions | 1100 x 900 x 900 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Seat cushion usable depth | 580 mm | |
| Seat cushion usable width (between armrests) | 620 mm | |
| Backrest total height (from seat surface) | 550 mm | |
| Armrest top height from floor | 620 mm | |
| Armrest panel thickness | 40 mm | |
| Matching side table dimensions | 600 x 600 x 550 mm | |
| Side table lower shelf clearance | 350 mm | |
| Floor clearance under sofa base | 20 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Per-seat static load capacity | 200 kg | |
|---|---|---|
| Per-seat net weight (reference) | 45 kg | |
| Seat cushion foam density | 45 kg/m³ | |
| Backrest foam density | 35 kg/m³ | |
| Seam stitching pull strength | 100 N | |
| Upholstery abrasion resistance (Martindale) | 50000 cycles | |
| Recommended number of users per seat | 1 adult per single seat | |
| Recommended usable lifespan for commercial application | 8 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery material | 1.2mm thick dark brown top-grain match PU leather | |
|---|---|---|
| Frame and trim material | Polished reddish-brown solid hardwood (rubber wood reference) | |
| Seat cushion padding | 45kg/m³ high-resilience polyurethane foam, 120mm thick | |
| Backrest padding | 35kg/m³ polyurethane foam, 80mm thick | |
| Inner support frame | 30mm thick kiln-dried hardwood frame, corner blocked and screwed | |
| Side table top material | 25mm thick solid wood veneer over MDF core, high-gloss polished finish | |
| Side table apron details | 20mm thick solid wood with traditional Chinese geometric hollow cutout | |
| Feet material | Solid hardwood block feet, finished to match wood trim, with non-slip felt pads at base | |
| Upholstery stitching details | 8 stitches per inch (3.15 stitches per cm) reinforced nylon thread | |
| Inner back support board | 12mm thick multi-layer hardwood plywood, covered with 10mm soft polyester batting | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Seating function | Fixed upright seating position with no recline, tilt or swivel function | |
|---|---|---|
| Integrated armrest function | Wide solid wood armrests provide stable arm support and impact-resistant surface, preventing damage from bags or items placed on armrests | |
| Modular pairing function | Identical single seats can be arranged in pairs, rows or L-shaped layouts to fit different reception area sizes | |
| Matching side table function | Stable flat table surface for placing teacups, documents, potted plants or visitor personal items, with lower open storage for magazines or small objects | |
| Upholstery maintenance function | Smooth PU leather surface resists liquid spills, can be wiped clean with a damp cloth without staining, suitable for high-traffic public use | |
| Structural stability function | Low center of gravity, wide solid wood base and block feet prevent tipping even when users sit on armrests or shift weight, meeting commercial furniture stability requirements | |
| Floor protection function | Non-slip felt pads on base feet prevent scratches on marble, tile or wood flooring, reduce sliding noise when moving seats for layout adjustment | |
| Seating support function | Fixed upright 105-degree seated position with no recline, tilt or swivel function | |
| Modular layout function | Identical single seats can be arranged in pairs, linear rows or L-shaped layouts to fit reception areas from 6 to 30 square meters | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
Verified carton / gross weight / assembly / loading data
| Number of packages per 2-seat + 1-table set | 3 packages total: 2 cartons for single sofas, 1 carton for side table | |
|---|---|---|
| Per-sofa carton dimensions | 1150 x 950 x 950 mm | |
| Per-sofa carton gross weight | 52 kg | |
| Side table carton dimensions | 650 x 650 x 200 mm | |
| Side table carton gross weight | 18 kg | |
| Total CBM per full set (2 chairs + 1 table) | 1.17 CBM | |
| On-site assembly time per full set | 20 minutes | |
| 40HQ container loading quantity (full set basis) | 58 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| VIP reception room application | Suitable for executive office VIP reception areas, government and corporate meeting rooms, formal visitor waiting spaces | |
|---|---|---|
| Lobby waiting area application | Can be arranged in rows or groups for hotel lobbies, bank service halls, hospital administrative waiting areas | |
| Small meeting space application | 2 seats with central table configuration creates a private 2-person conversation space for small negotiation, interview or consultation rooms | |
| Recommended matching configuration | Pairs with matching 3-seat sofa, additional side tables and wood-finish coffee table to create complete reception area sets | |
| Flooring compatibility | Suitable for installation on marble, polished tile, engineered wood and carpeted commercial flooring | |
| Target user profile | Designed for adult users in formal commercial and institutional settings, supporting professional posture during meetings and waiting periods | |
| Maintenance requirement note | Recommended for indoor climate-controlled environments, avoid prolonged direct sunlight to prevent leather fading and wood finish cracking, suitable for indoor commercial use only | |
| Full set matching configuration | Pairs with matching 3-seat sofa, additional side tables and matching wood-finish coffee table to create complete reception area sets |
EU Market Access Requirements* EN Standards
| BS EN 1022 | 2018 Domestic furniture – Seating – Determination of stability |
|---|
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 1952.1-2012 Upholstered furniture | Sofas |
|---|
This product must meet the following technical requirements: 1. GB/T 1952.1-2012 Upholstered furniture: Sofas; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
