| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall single armchair dimensions | 880 x 820 x 920 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Seat cushion usable dimensions | 600 x 650 mm | |
| Seat cushion total thickness | 120 mm | |
| Backrest total height from seat surface | 470 mm | |
| Armrest height from seat surface | 220 mm | |
| Armrest cross-section width | 60 mm | |
| Matching side table dimensions | 600 x 600 x 600 mm | |
| Side table lower shelf clearance | 200 mm | |
| Front leg cross-section | 50 x 50 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Single armchair net weight | 38 kg | |
|---|---|---|
| Single chair static seat load capacity | 150 kg | |
| Seat foam density | 40 kg/m³ | |
| Foam rebound rate | 55% | |
| Fabric abrasion resistance (Martindale) | 30000 cycles | |
| Recommended number of users per chair | 1 person | |
| Seam tensile strength | 120 N | |
| Floor pad compression set resistance | 25% | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Primary load-bearing frame | Walnut-finish solid hardwood, traditional mortise and tenon joinery | |
|---|---|---|
| Seat cushion core | High-density polyurethane foam, wrapped with soft polyester fiber top layer | |
| Backrest cushion core | Medium-density polyurethane foam, vertical channel quilting on front face | |
| Outer upholstery fabric | Off-white matte linen-blend performance fabric, dark contrast piping along all cushion edges | |
| Side panel upholstery | Same off-white fabric as main cushions, vertical pleated detail on inner side panel | |
| Armrest slats | Solid wood matching frame finish, 5 vertical slats per open armrest section | |
| Matching side table top | Solid wood same as chair frame, rounded edge profiling | |
| Side table lower shelf | Solid wood slatted shelf for open storage | |
| Frame foot pads | Non-slip rubber floor protection pads fitted to bottom of all legs | |
| Upholstery stitching | Dark high-tensile polyester thread, 8 mm stitch pitch | |
| Top armrest rail | Curved solid wood matching frame finish, rounded edge profiling for forearm comfort | |
| Seat support base | 80 mm wide elastic polyester webbing, spaced 60 mm apart across the seat frame |
Adjustment / rotation / tilt / mobility / storage features
| Seat support function | Fixed webbing-supported cushion base, no tilt or swivel mechanism, provides stable upright posture for formal reception use | |
|---|---|---|
| Cushion serviceability | Loose seat and back cushions allow removable cover for cleaning or replacement | |
| Armrest function | Curved solid wood armrests support full forearm rest, open slatted design reduces visual weight for traditional style | |
| Back support function | Angled fixed backrest aligns with natural spine curve, vertical channel stitching prevents foam shifting | |
| Matching side table function | Level top surface holds tea service, decor or small items; lower open shelf provides additional accessible storage | |
| Floor protection function | Rubber foot pads eliminate hard contact between wood legs and hard flooring, prevent scratches and reduce movement noise | |
| Armrest support function | Curved profiled solid wood armrests support 75 kg vertical forearm load, open slatted design reduces visual weight for new Chinese style aesthetics | |
| Edge safety function | All exposed wood frame edges feature 10 mm radius rounded profiling to eliminate sharp contact points for users | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Number of packages per 3-piece set (2 chairs + 1 table) | 3 packages | |
|---|---|---|
| Single armchair shipping carton dimensions | 920 x 860 x 700 mm | |
| Side table shipping carton dimensions | 640 x 640 x 640 mm | |
| Total gross weight per 3-piece set | 100 kg | |
| Total CBM per 3-piece set | 0.82 m³ | |
| Assembly time per set | 30 minutes | |
| 40HQ container loading quantity | 85 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| New Chinese style residential living rooms | Pairs with matching sofas and coffee tables for coordinated formal living room seating for family and guests | |
|---|---|---|
| High-end commercial reception areas | Suitable for executive office lobbies, tea rooms and VIP reception spaces, creates professional yet welcoming atmosphere | |
| Boutique hotel guest rooms and lounge areas | Provides elegant, culturally themed seating for hospitality spaces, durable upholstery withstands frequent guest use | |
| Tea house and cultural venue seating | Fits traditional Chinese tea service spaces, appropriate scale for side-by-side tea tasting and conversation | |
| Recommended configuration | Set of two armchairs with matching side table for corner seating, or combine with 3-seat sofa from same collection for full living room set | |
| Private study or reading nooks | Suitable for home office or study placement, 15 degree backrest angle supports extended upright reading posture without excessive recline | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture - Strength, durability and safety - Requirements for domestic seating, applicable for structural load and safety verification for residential use | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability, applicable to verify anti-tip performance of the fixed armchair | |
| EN 13722:2004 | Furniture - Upholstered furniture - Test methods for assessment of ignitability of mattresses and upholstered seating, applicable for fabric fire safety verification for commercial spaces |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for frame strength, dimensional stability and surface finish quality inspection | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, mandatory formaldehyde emission limit for finished wooden seating | |
| GB/T 1952.1-2012 | Upholstered furniture - Sofas, applicable for seat durability, foam performance and upholstery seam strength testing | |
| GB/T 17597-1998 | Furniture - Determination of surface resistance to cold liquids, applicable to verify wood finish resistance to tea and common beverage spills |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame strength, dimensional stability and surface finish quality inspection; 2. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, mandatory formaldehyde emission limit for finished wooden seating; 3. GB/T 1952.1-2012: Upholstered furniture - Sofas, applicable for seat durability, foam performance and upholstery seam strength testing; 4. GB/T 17597-1998: Furniture - Determination of surface resistance to cold liquids, applicable to verify wood finish resistance to tea and common beverage spills; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
