| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set net weight (chair + ottoman) | 39 kg | |
|---|---|---|
| Maximum static weight capacity | 150 kg | |
| Cushion foam density (seat/back) | 35 kg/m³ | |
| Foam rebound rate | 60% | |
| Fabric abrasion resistance | 100000 Wyzenbeek double rubs | |
| Seat cushion compression set after 1000 hours | 10% | |
| Static load rating per leg | 50 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Inner support shell | 8mm thick molded fiberglass-reinforced polymer composite | |
|---|---|---|
| Upholstery fabric | 100% polyester oatmeal boucle, 380gsm weight | |
| Seat cushion fill | Multi-layer polyurethane foam, 120mm total thickness | |
| Back/lumbar cushion fill | 40mm soft polyurethane foam with fiber wrap | |
| Leg frame | 16mm diameter seamless bent tubular steel, polished chrome plating 0.3mm | |
| Floor glides | Non-marking nylon base with stainless steel cap, adjustable height | |
| Upholstery stitching | 8mm seam pitch, matching thread, piped cushion edges | |
| Shell base upholstery layer | 10mm shape-forming polyurethane foam bonded directly to FRP shell | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Posture support | Fixed 110-degree relaxed reclined back angle molded into shell | |
|---|---|---|
| Cushion configuration | Removable loose seat, back and lumbar cushions with non-slip base | |
| Base stability | 4-point splayed leg design with 780mm leg spread for tip resistance | |
| Floor protection | Adjustable height glides to level unit on uneven hard floors | |
| Assembly requirement | Knock-down leg installation with included hex key hardware | |
| Comfort design | Integrated curved armrests formed as continuous part of enveloping shell | |
| Ottoman function | Matching height ottoman for elevated leg rest to reduce lower body pressure | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential living room | Ideal for reading nooks, lounge corners or paired with sofas as accent seating | |
|---|---|---|
| Office lounge and breakout areas | Suitable for informal waiting zones or employee relaxation spaces | |
| Hospitality lobbies and hotel guest rooms | Appropriate for boutique hotel seating or upscale reception lounges | |
| Residential bedroom sitting areas | Works as a dedicated relaxation chair in master bedrooms or suites | |
| Floor surface compatibility | Safe for use on hardwood, tile, polished concrete or low-pile carpeted floors | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Domestic furniture seating safety | EN 12520:2015 | |
|---|---|---|
| Upholstered furniture flammability | EN 1021:2014 | |
| Furniture hardware performance | EN 15372:2008 |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| Upholstered furniture mechanical safety | GB 28007 | |
|---|---|---|
| Furniture formaldehyde emission | GB 18584 | |
| Furniture metal surface coating | GB/T 3324 |
This product must meet the following technical requirements: 1. Upholstered furniture mechanical safety: GB 28007; 2. Furniture formaldehyde emission: GB 18584; 3. Furniture metal surface coating: GB/T 3324; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
