| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 600 x 600 x 700 mm | |
|---|---|---|
| Tabletop diameter | 600 mm | |
| Tabletop thickness | 19 mm | |
| Floor to tabletop underside clearance | 680 mm | |
| Central pedestal column diameter | 80 mm | |
| Cruciform base footprint span | 550 mm | |
| Base arm width | 40 mm | |
| Base floor clearance | 2 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Static tabletop load capacity | 15 kg | |
|---|---|---|
| Product net weight | 7 kg | |
| Tip stability load offset | 5 kg | |
| Surface abrasion resistance | 2000 cycles | |
| Limited warranty period | 1 year | |
| Available finish options | 1 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 19mm thick E1 grade MDF | |
|---|---|---|
| Tabletop finish | Matte white polyurethane paint | |
| Central pedestal column | 1.2mm thick powder-coated steel tube | |
| Cruciform base arms | 1.5mm thick powder-coated steel flat bar | |
| Base joint connection | Welded steel joint between column and base | |
| Floor contact pads | 2mm thick non-slip felt pads | |
| Surface coating properties | Stain-resistant wipe-clean matte coating | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Height adjustment | Fixed 700mm working height | |
|---|---|---|
| Seating cluster configuration | Serves up to 3 adjacent lounge armchairs | |
| Tabletop use case | Supports drinks, coasters, reading material and small portable devices | |
| Floor protection | Felt base pads prevent hard floor scratching and reduce movement noise | |
| Assembly requirement | Knock-down assembly of tabletop to column and base | |
| Cable management | No integrated cable routing or power modules | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Office waiting area lounge clusters | Placed at center of 3 lounge armchairs for guest drink and material placement | |
|---|---|---|
| Breakout collaboration zones | Used for informal small group discussions with light refreshments | |
| Reception area side placement | Positioned beside guest seating to hold branded materials and visitor belongings | |
| Hotel lobby casual seating zones | Deployed in clustered seating arrangements for guest convenience | |
| Co-working open lounge areas | Used as shared surface for mobile work breaks and casual meetings |
EU Market Access Requirements* EN Standards
| Surface scratch resistance | EN 15186:2012 Class 2 | |
|---|---|---|
| Static load test | EN 15372:2016 Level 2 |
US and Canada office-furniture standards
| Table stability | ANSI/BIFMA X2021Clause 7 | |
|---|---|---|
| Vertical static load | ANSI/BIFMA X2021Clause 5 |
Standards applicable to China-market projects
| Formaldehyde emission | GB/T 18580E1 grade | |
|---|---|---|
| Surface coating adhesion | GB/T 4893.4Grade 1 | |
| Stability performance | GB/T 10357.7 |
This product must meet the following technical requirements: 1. Formaldehyde emission: GB/T 18580E1 grade; 2. Surface coating adhesion: GB/T 4893.4Grade 1; 3. Stability performance: GB/T 10357.7; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
