| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set arrangement diameter | 2200 mm | |
|---|---|---|
| Single lounge chair overall size | 760 x 790 x 840 mm | |
| Lounge chair seat height | 450 mm | |
| Lounge chair seat width | 560 mm | |
| Lounge chair seat depth | 580 mm | |
| Lounge chair arm height | 430 mm | |
| Lounge chair backrest height | 420 mm | |
| Round side table overall size | 500 x 500 x 530 mm | |
| Side table tabletop diameter | 500 mm | |
| Side table pedestal base diameter | 280 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Per-chair recommended static load capacity | 136 kg | |
|---|---|---|
| Single lounge chair net weight | 33 kg | |
| Cushion foam density | 40 kg/m³ | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Cushion foam rebound rate | 45% | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Chair seat and back upholstery | 1.2mm thick tan faux leather with vertical channel stitching | |
|---|---|---|
| Chair internal frame | 1.5mm thick powder-coated steel tube welded support structure | |
| Chair legs | Matte black powder-coated angled steel legs with non-marking floor glides | |
| Seat cushion padding | 80mm thick high-density polyurethane foam with soft top layer | |
| Backrest padding | 60mm thick high-density polyurethane foam formed to curved channel profile | |
| Side table tabletop | 12mm thick white marble-look sintered stone with polished finish | |
| Side table base | 2mm thick matte dark gray powder-coated tapered steel pedestal | |
| Upholstery stitching | Bonded polyester thread with 8mm seam pitch | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | 4 inward-facing curved chairs enabling face-to-face conversation | |
|---|---|---|
| Chair construction | Fixed stationary frame with no recline, swivel, or height adjustment | |
| Floor protection | Non-marking plastic glides fitted to all chair leg and table base contact points | |
| Table clearance | 490mm clearance under tabletop for easy chair positioning and leg room | |
| Upholstery maintenance | Wipe-clean faux leather surface resistant to common stains and spills | |
| Table surface performance | Scratch, heat, and stain resistant sintered stone top for daily commercial use | |
| Assembly requirement | Knock-down assembly with included hardware attaching legs to chair frames and table top to base | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Office reception areas | Provides casual guest seating for visitor waiting and check-in spaces | |
|---|---|---|
| Shared lounge and breakout zones | Supports informal employee breaks and small impromptu conversations | |
| High-rise residential lobby areas | Creates compact waiting points near elevator lobbies and entryways | |
| Creative studio negotiation spaces | Enables relaxed client meetings and small team discussion sessions | |
| Hotel lounge waiting areas | Fits premium public spaces for short-stay guest seating | |
| Retail salon consultation zones | Serves as comfortable seating for client consultations and waiting | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Applicable to Strength, durability and safety for non-domestic seating | |
|---|---|---|
| EN 15372:2016 | Applicable to Strength, durability and safety for non-domestic tables |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2022 | Applicable to Performance standard for lounge and public seating | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Applicable to Performance standard for desk and occasional tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to General technical requirements for metal furniture | |
|---|---|---|
| GB/T 16799-2008 | Applicable to Performance requirements for furniture-use artificial leather |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to General technical requirements for metal furniture; 2. GB/T 16799-2008: Applicable to Performance requirements for furniture-use artificial leather; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
