| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 950 x 850 x 700 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total net weight | 32 kg | |
|---|---|---|
| Static seat load capacity | 150 kg | |
| Foam density | 35 kg/m³ | |
| Fabric abrasion resistance | 50000 Martindale cycles | |
| Recommended user weight limit | 120 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| External upholstery | Terracotta boucle woven fabric | |
|---|---|---|
| Seat core padding | High-density polyurethane foam | |
| Internal support frame | Solid kiln-dried hardwood | |
| Bottom base lining | Non-slip black felt fabric | |
| Seam construction | Reinforced stitched seams | |
| Loop structural core | Curved laminated wood sections | |
| Adhesive materials | Low-VOC water-based adhesive | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm |
Adjustment / rotation / tilt / mobility / storage features
| Seating orientation | Single-direction relaxed lounge seating | |
|---|---|---|
| Structural armrest support | Continuous loop forms integrated side supports | |
| Back support ergonomics | Curved upper loop provides lumbar and mid-back support | |
| Floor protection | Felt base glides prevent scuffs on hard tile or wood floors | |
| Maintenance access | Fixed upholstered design, non-removable covers | |
| Modular compatibility | Freestanding individual unit | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential living room use | Placed as statement accent chair next to sofas or coffee tables | |
|---|---|---|
| Commercial lounge reception areas | Suitable for hotel lobbies, modern office waiting zones and design studios | |
| High-end retail display spaces | Used in boutique fitting areas or showroom display zones | |
| Pair configuration setup | Place two units facing each other with a low coffee table between | |
| Low-pile carpet and hard floor compatibility | Felt base works on tile, polished concrete, wood and low-pile rugs | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
