| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 770 x 850 x 860 mm | |
|---|---|---|
| Seat width | 640 mm | |
| Seat depth | 625 mm | |
| Seat height from floor | 480 mm | |
| Back cushion dimensions | 600 x 380 mm | |
| Seat cushion thickness | 242 mm | |
| Armrest height from seat | 166 mm | |
| Leg height from floor | 150 mm | |
| Armrest overall height from floor | 646 mm | |
| Under-seat floor clearance | 120 mm | |
| Tapered leg diameter at floor | 30 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Recommended static weight capacity | 150 kg | |
|---|---|---|
| Assembled net weight | 25 kg | |
| Backrest recline angle | 105 degrees | |
| Seat cushion foam density | 38 kg/m³ | |
| Foam rebound rate | 55% | |
| Back cushion foam density | 30 kg/m³ | |
| Seam stitch pitch | 8 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer arm/back shell upholstery | Teal smooth faux leather, 1.0 mm thickness | |
|---|---|---|
| Seat and back cushion upholstery | Light gray woven polyester fabric, 0.8 mm thickness | |
| Internal load-bearing frame | 18 mm thick engineered plywood and solid wood | |
| Cushion core | High-density polyurethane foam wrapped with polyester dacron | |
| Legs | 28 mm thick solid rubberwood with matte black finish | |
| Foot caps | 1.2 mm thick polished brass-plated steel | |
| Floor contact pads | Non-marking rubber pads, 2 mm thickness | |
| Seat edge stitching | High-tenacity polyester contrast thread | |
| Internal support webbing | 50 mm wide elastic webbing, 8 straps | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Single-seat fixed-position lounge seating, no recline or swivel mechanism | |
|---|---|---|
| Back cushion design | Removable square loose cushion for cleaning and comfort adjustment | |
| Back support geometry | Continuous curved wrap-around arm/back shell for enclosed side support | |
| Leg assembly | Knockdown leg attachment via pre-installed metal threaded inserts | |
| Floor protection | Non-slip rubber foot caps that prevent hard floor scuffing | |
| Cleaning access | Zippered cushion covers for fabric sections to allow removal for spot cleaning | |
| Structural stability | Outward-splayed leg geometry to prevent tipping during normal use | |
| Use case positioning | Fully assembled ready for placement with no additional accessories required | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Packaging material | 5-ply corrugated carton with 20 mm EPE foam edge protection | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential living room use | Place as side accent seating next to sofas or in reading nooks | |
|---|---|---|
| Office reception and waiting areas | Use as guest seating in lobbies or informal meeting spaces | |
| Bedroom vanity or reading corner | Position as compact seating near vanities or windows for relaxed use | |
| Hotel lounge and guest room use | Deploy in boutique hotel common areas or guest room seating zones | |
| Small apartment space use | Fit in compact urban living spaces where full-size sofas are impractical | |
| Cafe and co-working breakout zones | Use for casual seating in customer seating areas or co-working break spaces | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
