| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 450 x 630 mm | |
|---|---|---|
| Worktop thickness | 6 mm | |
| Caster diameter | 50 mm | |
| Open shelf compartment width | 400 mm | |
| Upper open shelf internal height | 250 mm | |
| Lower open shelf internal height | 320 mm | |
| Slatted door compartment width | 400 mm | |
| Slatted door compartment internal height | 570 mm | |
| Side panel thickness | 18 mm | |
| Metal frame profile width | 20 mm | |
| Slat bar width | 15 mm | |
| Internal shelf thickness | 15 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Worktop static load capacity | 50 kg | |
|---|---|---|
| Caster dynamic load rating per wheel | 30 kg | |
| Stone worktop heat resistance | 180 °C | |
| Worktop surface abrasion resistance | 6000 cycles | |
| Recommended maximum user weight for top seating use | 0 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Worktop | 6mm thick sintered stone with dark speckled textured finish | |
|---|---|---|
| Structural frame | Brushed gunmetal gray aluminum extrusion with anodized anti-rust coating | |
| Side panels | 18mm thick dark gray honeycomb-textured engineered composite panel | |
| Sliding door | Vertical brushed metal slats with 10mm ventilation gaps between bars | |
| Internal shelves | 15mm thick dark gray laminated engineered wood, height-adjustable with metal pins | |
| Caster wheels | 50mm diameter 360° swivel polyurethane casters, two with locking brakes | |
| Door sliding track | Galvanized steel top and bottom track for smooth door operation | |
| Interior back panel | 3mm thick dark gray hardboard backing | |
| Edge banding | 1mm thick PVC edge sealing on all engineered wood panels | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Mobility function | Four 360° swivel casters, two with locking brakes, for easy repositioning between tea service areas | |
|---|---|---|
| Open shelving storage | Two-tier left open compartment with adjustable shelf heights, sized for teapots and tea canisters | |
| Tall item storage | Full-height right slatted-door compartment, ventilated for upright bottled water or waste water buckets | |
| Door operation | Horizontal sliding metal slat door with quiet glide track, no protruding handle for flush exterior | |
| Worktop use | Heat-resistant scratch-proof stone surface sized for electric kettle, sterilizer and tea prep tools | |
| Shelf adjustment | 5-position adjustable shelf pin holes allow 30mm incremental height changes for stored items | |
| Ventilation function | Slatted door gaps provide passive air circulation to prevent moisture buildup in closed storage | |
| Anti-tip safety | Included wall anchor strap secures cabinet to wall to prevent tipping when fully loaded | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Living room application | Placed beside sofa or coffee table for convenient kung fu tea service setup | |
|---|---|---|
| Home tea room application | Used as compact dedicated tea storage unit for teaware and water supply | |
| Office lounge application | Deployed in staff break areas for tea and coffee preparation station | |
| Balcony application | Positioned on covered balconies for casual outdoor tea preparation, mobile for repositioning | |
| Studio/study application | Used as side storage next to a desk for tea supplies and small beverage equipment |
EU Market Access Requirements* EN Standards
| Furniture stability | EN 14749:2016 | |
|---|---|---|
| Caster performance | EN 12529:1999 | |
| Surface scratch resistance | EN 15186:2012 |
Standards applicable to China-market projects
| Cabinet structural safety | GB/T 3324 | |
|---|---|---|
| Stone surface performance | GB/T 3810.1 | |
| Metal coating adhesion | GB/T 9286 | |
| Hardware durability | GB/T 10357.5 |
This product must meet the following technical requirements: 1. Cabinet structural safety: GB/T 3324; 2. Stone surface performance: GB/T 3810.1; 3. Metal coating adhesion: GB/T 9286; 4. Hardware durability: GB/T 10357.5; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
