| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 600 x 430 x 610 mm | |
|---|---|---|
| Leg height | 102 mm | |
| Undercabinet floor clearance | 102 mm | |
| Drawer internal dimensions | 275 x 290 x 80 mm | |
| Top surface usable area | 560 x 390 mm | |
| Drawer front panel thickness | 18 mm | |
| Frame side panel thickness | 18 mm | |
| Leg diameter at floor contact | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Top surface static load capacity | 23 kg | |
|---|---|---|
| Total product net weight | 18.1 kg | |
| Drawer slide operational cycle rating | 50000 cycles | |
| High-gloss surface abrasion resistance | 2000 cycles | |
| Recommended maximum placed item height | 350 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top panel and outer frame | Light oak solid wood with natural matte lacquer finish | |
|---|---|---|
| Drawer front panels | MDF core with high-gloss white UV lacquer finish | |
| Drawer box construction | 12mm thick plywood with dovetail joinery | |
| Support legs | Solid oak tapered splayed legs with natural oil finish | |
| Integrated drawer pulls | Solid oak recessed horizontal pulls matching frame finish | |
| Drawer slides | Cold-rolled steel full-extension side-mount silent slides | |
| Back panel | 3mm thick hardboard with dust-seal fit | |
| Foot pads | Non-marking plastic floor protection pads fitted to leg bases | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Two vertically stacked full-width drawers extend on side-mount slides for bedside storage | |
|---|---|---|
| Integrated pull design | Recessed horizontal wood pulls eliminate protruding hardware to reduce bump injury risk | |
| Raised base design | Splayed legs elevate the cabinet body 102mm above floor for robot vacuum access | |
| Surface protection | High-gloss white drawer fronts are stain-resistant and wipe-clean for daily maintenance | |
| Structural stability | Four splayed angled legs distribute weight outward to reduce tipping risk during use | |
| Assembly requirement | Main cabinet body ships pre-assembled, only legs require attachment with included hardware | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Small space studio use | Compact 600mm width footprint fits narrow bedrooms, dorm rooms or studio apartments | |
|---|---|---|
| Modern Nordic interior schemes | Light oak and high-gloss white two-tone finish matches Scandinavian, mid-century and minimalist decor | |
| Side table use in living spaces | Usable as a compact end table next to sofas or armchairs for holding drinks, lamps and small items | |
| Youth bedroom application | Rounded top corners and flush hardware eliminate sharp edge hazards for child-safe use |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage furniture safety requirements, applicable for storage unit stability | |
|---|---|---|
| EN 12521:2015 | Domestic furniture strength/durability requirements for tables and storage units |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability verification | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability verification; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
