| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 450 x 400 x 550 mm | |
|---|---|---|
| Leg height | 150 mm | |
| Ground clearance under body | 150 mm | |
| Top surface usable area | 430 x 380 mm | |
| Single drawer internal dimensions | 370 x 340 x 140 mm | |
| Handle length | 120 mm | |
| Corner radius | 20 mm | |
| Upper drawer front height | 160 mm | |
| Lower drawer front height | 160 mm | |
| Leg top diameter | 34 mm | |
| Leg bottom diameter | 24 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Top surface static load capacity | 30 kg | |
|---|---|---|
| Net product weight | 14 kg | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Surface scratch resistance rating | Class 2 | |
| Recommended maximum items per drawer | 20 | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main cabinet frame | 15mm thick engineered wood board with light natural wood veneer | |
|---|---|---|
| Drawer fronts | 15mm thick MDF panel with matte off-white lacquer finish | |
| Legs | Solid rubberwood tapered splayed legs with clear matte lacquer | |
| Integrated drawer pulls | Solid natural wood horizontal bar handles, flush mounted | |
| Drawer sides and base | 12mm thick engineered wood board with smooth interior finish | |
| Drawer glides | 3-section metal ball-bearing side-mount slides | |
| Leg foot pads | Anti-slip anti-scratch rubber pads fitted to each leg base | |
| Edge banding | PVC edge banding matched to wood finish on all cut edges | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Two fully extendable drawers open via horizontal integrated wood pulls, no protruding hardware | |
|---|---|---|
| Surface storage | Flat rounded-edge top surface holds small bedside items including books, planters, lamps and devices | |
| Floor protection | Rubber foot pads prevent floor scratches and slip on hard or carpeted bedroom floors | |
| Under-unit clearance | 150mm open space below cabinet body allows robot vacuum access and easy floor cleaning | |
| Assembly requirement | Knock-down leg assembly required, all hardware and instructions included | |
| Edge safety | Rounded 20mm radius corners on all exposed edges eliminate sharp impact points | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential bedroom bedside placement | Positioned adjacent to single or double beds for overnight storage of phones, books and personal items | |
|---|---|---|
| Small apartment living room side table use | Used beside sofas or armchairs to hold drinks, remotes and small decor items | |
| Children's bedroom storage | Rounded edges and low height make it suitable for child-safe bedside storage | |
| Short-term rental furnished units | Durable construction and neutral Nordic finish suit furnished apartment and homestay configurations | |
| Compact home office side storage | Placed beside desks to hold office supplies, personal items and small desk accessories |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for domestic use, strength, durability and safety requirements for storage units | |
|---|---|---|
| EN 71-3:2019 | Safety of toys, migration of certain elements, applicable for lead/heavy metal content checks on finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stabilityAcceptance inspection | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances in wooden furniture, applicable for formaldehyde emission checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stabilityAcceptance inspection; 2. GB 18584-2001: Indoor decoration material limit of harmful substances in wooden furniture, applicable for formaldehyde emission checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
